First, I am very happy with this machine. Don't let the reviews or coffee zealots scare you away. This machine is beautiful, well constructed, easy to use, and capable of making really, really good espresso.

Having gone on a number of trips to Rome in the past couple of years, I always missed the espresso there. So I bought a 300 dollar de longhi machine and that passed for about a month before it crapped out. It kept spitting out coffee for a couple of years, but it also spit out leaking water, and was incapable of foaming.

So I decided I needed a machine that would last. This machine will last 30+ years if properly maintained.

I was very worried that I wouldn't be able to make acceptable coffee for years because the people on forums always say this has a steep learning curve. However, having really done my research, I found out everything I needed to know to use this before it even arrived.

First, I got the rocky burr grinder to use with this and couldn't be happier. Second, I bought some Lavazza coffee beans. Then, I got some accessories. A knock box is well worth it. Luckily I had the correct sized tamper from before (51mm).Though not necessary, I bought a cheap digital scale. This has been helpful in the process of dialing in on all of the many variables. Because the quality of your coffee will be dependent on grind, amount of grinds, tamp, and your use of the machine, you need to work out the different variables one at a time, making only a single adjustment with each pull.

To start I dialed in 7 on the rocky. I ground up 16 grams of coffee. I later moved it to 8, then reduced my grinds to 15 grams. I tamped a little harder, softer, than found the sweet spot. Then with each pull, I tried different methods for working the lever. Having done my research and having watched videos, I have settled on this process. 10 second Preinfusion, a 3/4 pull, another ten second preinfusion, and then a full pull.

The first two cups were hardly drinkable, but each one got better and now only a week in, I'm making the best coffee I've ever had in the United States. I'm not quite at Rome level, but I am certainly on my way.

So, despite those who said I'd never make good coffee with this, I am. Is it a little difficult to use? That's relative. The whole process doesn't take that long, but it's certainly not a super automatic and it's not for those who won't enjoy fiddling with this machine for a long time to come. I love it, couldn't be happier, and am glad I made the purchase.

If you don't see an update, that means I'm still very happy with this! God forbid something happens, I'll post about it.

I'm making espresso daily with this machine with absolute great result. It is $$$ but I love it.

Cant say the same for all the La Pavoni EPC-8 Europiccola 8-Cup Lever Style La Pavoni, ours worked fine for two days then something shorted out and it stop working had to return it for a full refund.

It's been 15 months since we got our La Pavoni from Amazon and we've made an average of 2-3 shots a day since then. Affogatos, coffee over ice, lattes, americanos... this machine gets serious use and is one of the best purchases we've ever made. That said, I've never purchased anything that is seemingly so simple and yet has taken so long to really feel like I've "mastered". Many of the tips and tricks that I've ended up relying on are mentioned in other reviews, but some weren't - so here's my summary of everything I've learned in the last year. I'm now consistently pulling gorgeous shots. This machine will reward you, I promise!

When we first got it, it was a refurbished model and I honestly thought it was broken. Everything I did with it turned out kind of crappy. I got no crema, often times the water would start seeping through the coffee before I pumped no matter how hard I tamped. This may well be the experience of many first timers. It was the result of 3 key factors that were wrong: Bad grind, old coffee, group head not hot enough. Let's look at those 3 key factors:

1) The grind: We started out with a Bodum grinder on the finest setting and eventually bought a Rancillio Rocky. Many others have said, "don't bother with anything less than the Rocky" and I'd concur wholeheartedly with that. It may seem a kick in the pants when you've already spanked over $800 on the La Pavoni to throw another $400 at a grinder, but if you're not willing to do that, don't even bother with the espresso maker.
Grind is such a critical factor in getting a good shot, not just the consistency of the grind but the big differences that tiny variations can make. Lighter roasts need coarser grinds than darker roasts; older coffee will need a finer grind than newer coffee; the machine at temperature needs a coarser grind than if it's not fully warmed up.
So what is the "perfect" grind? It's the one where you don't have to tamp too hard and where you have to exert fairly firm pressure on the lever to get a 20-30 second shot. If the grind is too course, you'll get less crema, less extraction and it will pump too fast. The fine adjustment available on a grinder like the Rocky allows you to find the sweet spot for the beans that you have - one click out of 60 makes a noticeable difference.

2) Old coffee. I'd read people asserting that espresso beans are basically junk 3 weeks after roasting and I dismissed this as perfectionism/snobbery. In truth, for french press and probably just about any other use, coffee beans that are a month old are probably fine.
However your La Pavoni will punish you for using old coffee. Don't buy from the bulk section in the supermarket and pay particular attention to the roast date on the bag. The turning point for me was when I saw a video on YouTube of a guy proudly pulling an stupendous crema from the same model of La Pavoni. What is he doing differently?? Why can't I get that??
I noticed he was using beans from a Montana roastery called "Red Bird". I ordered a bag of Blue Jaguar and tried it out. It was a revelation! Red Bird not only sells exceptional coffee, but they roast right before they ship out, so it's guaranteed fresh. If you're struggling with crema, trust me - just order a bag from them and see if it makes a difference. If it doesn't, your coffee beans are not the problem.
For what it's worth we now order 5lb bags from Red Bird and use a vacuum sealer to seal them into 12oz bags the moment it arrives. We then put these bags in the freezer. This way it works out at about $10/lb with free shipping which is a STEAL considering the quality of the coffee and the ridiculous prices charged by the Bay Area wax-moustache brigade.

3) Group head temperature: Many people in other reviews talk about the first shot always being disappointing. We found that too. There's no logical reason for this to be the case and it's all down to the fact that the machine needs to be fully up to temperature before you pull.
The best investment we made - and I waited far too long to purchase this - was a stick-on thermometer that goes on the front of the group-head. It ranges from 194F to 248F and it tells you for sure whether your group-head is at temperature. Without this, you're guessing and you're probably guessing wrong. I was amazed at how many "fake shots" (pulling the lever to let hot water through without the portafilter in place) the machine needs when you first turn it on before you have a decent temperature at the group head. I usually wait until it gets up to 212F and then I'm guaranteed to get a decent first shot. Before getting the thermometer, I was just going by touch which just isn't accurate enough.
I don't think Amazon sells these thermometers - we found ours online at a specialty espresso parts store.

Finally, here are some tips that I've found to be very useful and I hope you do too:

- Temperature: There are many out there who talk about the machine overheating and burning shots if left on. This has not been my experience and from what I've read, the "millennium" edition (being sold here) solved that problem. There may be some who disagree with me and we don't leave it on for hours, but over-heating has never been an issue.

- Pumping: The machine produces quite small shots, but gives you fabulous control over not only how much water goes through, but the speed too. When I first got the machine I wondered a lot about how much time you should wait with the lever in the fully up position before pumping? How long is too long? When the lever is fully up, water is being pushed under a small amount of pressure into the coffee. If the grind is too course/inconsistent or the machine isn't hot enough, it may push right through even before you start pumping. If this is happening, your shot will suck.
The pump is where a lot of the "feel" of the machine comes in. Both in when to pump and how hard to pump.
When to pump: If the grind, tamp and temperature are all correct, it won't really matter how long you have the handle up for because the water won't find its way far into the coffee under its own pressure.
How hard to pump: What you're looking for is that the pump should feel firm when pressed down a small amount. If it feels "spongy", I do some short pumps until it firms up. If you've ever driven a car where the brake pedal needs to be pumped to get good pressure, it's a very similar feeling. If you pump with the spongy feeling, you'll find that the shot you pull is going to be smaller than ideal and may not have great extraction. One trick I've learned recently that's really helped with this is to leave the portafilter in for a good minute before even lifting the pump handle. This heats up the top of the coffee, causes it to expand a little and seems to really help with building that firm feeling. Even then, I may pump a little water into the coffee (before it comes out) and then go straight back up to get some more in before doing the full pump.
At the end of the day, the most important thing is that the water goes through in 20-30s and that you are exerting some decent force on the pump. You'll feel it out, but don't get stuck in the notion that the pump has to go straight up and straight down. You are in complete control.

- Tamping: If your grind is good, you shouldn't need to tamp particularly hard. The one thing to avoid is getting a situation where the shot appears to be coming out of only one side of the portafilter. This means that it's found a hole somewhere that has allowed it to progress unevenly through the coffee. I tried a few techniques to avoid this, including "gardening" the coffee with a fork or similar. Turns out the simplest way to avoid streaming is to just give the portafilter a few good bangs on a rubber mat as you fill it. It just helps the lumps to spread out.
In terms of getting the correct amount of coffee in, I actually tamp twice. I fill it up so that it's not spilling out, bang it on the rubber mat a few times, give it a light tamp, fill it again and then tamp fully. This minimizes the spillage/wastage of coffee.

- Steaming milk: Getting good steamed milk from this machine has been the biggest challenge for me. There are some days when it comes out great and other days when it doesn't. I have yet to figure out a definitive formula for this. However, I will share what has helped. Having the machine full of water tends to work better than if the water is low - probably due to the fact that it can produce more steam. Getting the milk to swirl seems to help - that all comes down to the angle of the wand. Keeping the wand just under the surface so that it's not making big bubbles also seems to be helpful, but this does require a steady hand. Too much milk or too little milk also seems to be problematic. I did try buying a single nozzle attachment for the steam wand to see if it would help, but that was worse.

I hope that this is helpful. I will take you a while before you feel really confident with this, but once you do, boy is it worth it.

The setup of the unit was pretty simple but took some time since they want you to use descaler on it at the first startup. All this labor went fine and I had a decaf espresso before bed. However, the morning brought bad news. The unit would not pressurize and vented steam continuously. I tried a few off/on sequences, water levels, light tapping but it became apparent that the pressure valve was defective. I attribute this to the poor packaging. The unit arrived slightly wet from factory testing but was not wrapped in any plastic. The styrofoam packing was the real cheap stuff so it was all over the unit and may have gotten into the pressure valve. I likely could have disassembled it to clean the valve however this requires special tools to access the nut inside the pressure tank. The bottom line is that this is going back and I'll try one more. If that works out I'll change my review, if not that will go back and I'll change to another brand.