Fulton Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 Each 3/8" Hold Downs and 2 Zero Clearance Inserts
Key features
- •Drill press machines are great for woodworking, metal working, plastic or composite drilling and more when you need to drill a straight hole or many holes in quick succession. The trouble with most drill press machines is that the table top that comes with them are not very practical. In steps the Fulton Drill Press Table, which is one of the thickest, most dense, vibration absorbing tables available today.
- •The Drill Press Table measures approximately 15" x 24" x 1-3/8" thick and is laminated on both top and bottom to prevent warping and to keep the table top flat. The top of the table is laminated with a smooth material that allows for easy positioning of your stock and is very easy to clean with household cleaners. The table also has a zero clearance is included that can be used for specific size bits.
- •Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter. That feature alone separates the Fulton Drill Press Table from the others
- •Below the zero clearance insert is an opening that measures approximately 5-5/16" x 5-5/16" at the top with a circle cut out of the center that is about 3-3/4" in diameter. The circular cut-out is approximately 1" deep. This gives you plenty of room to drop a drum sander below the top surface of the table and use the drill press like a spindle sander. You can use a drum sander that is as large as 3" in diameter.
- •That feature alone separates the Fulton Drill Press Table from the other "feature laden" and very expensive table tops. Another unique feature is that the table has been designed to fit on most any drill press table with a unique track mounting system underneath the table. You can mount the table top with the included post knobs if you have a slotted factory table top on your drill press or you can use the included aluminum hold down clamps to mount to any other style of table top.
Fulton Drill Press Table 15" x 24" x 1-3/8" Thick with Aluminum L Fence, 2 Each 3/8" Hold Downs and 2 Zero Clearance Inserts
List Price: $144.38$129.94DEALYou Save: $14.44 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
50%
4★
50%
3★
0%
2★
0%
1★
0%
Thick, flat, and way better than if I were to make my own.
Pidasso✓ Verified Purchase•November 2, 2023
Works great, mounted to my Jet drill press flawlessly. Attaches tightly with no movement, and even includes a spare backing plate for the pre-routed hole. High quality materials, and the table is thick so seems durable. The laminate is a plus, wood slides easily while drilling.
The included fence is 90° To the table without any modifications. You will need to provide your own face piece of mdf, which is plentiful from my other projects and jigs.
I am happy I bought this. I watched several YouTube videos of people making there own. But his looks good and functions well. Way easier than trying to make my own. And the table is flat (not guaranteed if I were to make my own lol)
I will update this once I've had a chance to extensively drill pieces on it.
The included fence is 90° To the table without any modifications. You will need to provide your own face piece of mdf, which is plentiful from my other projects and jigs.
I am happy I bought this. I watched several YouTube videos of people making there own. But his looks good and functions well. Way easier than trying to make my own. And the table is flat (not guaranteed if I were to make my own lol)
I will update this once I've had a chance to extensively drill pieces on it.
A good value for the product received!
Corley Southern✓ Verified Purchase•October 29, 2023
I just got mine today and I have to say that the previous reviews were pretty accurate. The parts are substantial and of good quality materials. You do have to install the rails but that just takes a few minutes. I did use larger screws that those provided but that was my choice. The fence will probably need shimming with a couple of strips of tape like most every other woodworking tool I have ever purchased. Overall I'm satisfied so far. I don't believe that I could have made one any better myself for the same money.
GREAT DRILL PRESS TABLE
C. Dixon✓ Verified Purchase•September 24, 2023
I purchased this table to use on my 10" Ryobi drill press that came with a small table with four diagonal slots designed for a drill press vise. The two screw-in handles that came with the Fulton table attached it solidly through the Ryobi's two diagonal rear slots. I did replace the included fence with a Biesemeyer 18-901 Universal Drill Press Table Fence that fit like it was designed for the Fulton table. The Biesemeyer fence has a low and high position, a built-in ruler for both positions and a built-in stop block. I am pleased with the Fulton table and would have given it 5 stars if their fence had been designed to the same standards as the table. Most of the tables I found would not work on the smaller drill presses and the Fulton was the best of the two that would. I would definitely purchase it again.
Great piece of equipment - and great customer service
macdeke✓ Verified Purchase•September 20, 2023
This table is just the right size and has great appointments. Other reviews are correct in saying that you should get #6 5/8" screws instead of using the ones they send. But this table goes together quickly, it is clean and well made. I had a little issue with the hold-down clamps. The tracks on this table and matching bolts are 3/8" which are nice and heavy duty. However, I received hold-down clamps for 1/4" bolt and mini track. I sent a nice email to Peach Tree, explaining the situation, attached a PDF of my Amazon invoice, with my contact information. Within 12 hours they had shipped the right size hold-down clamps. No fuss, no muss. They were very nice and responsive. Keep up the good work! Definitely a 5 star.
Basic Drill Press Table (Peachtree)
Chris B.✓ Verified Purchase•September 15, 2023
I felt like I was taking a chance ordering this drill press table having read only one review (although it is favorable). However, this is probably the best $99 I've ever spent.
The table came very well packaged, is solid, and was super easy to mount on my Delta DP300L 12" drill press using the t-track on the bottom of the table. The only "assembly" required is fastening 3 t-tracks with 5 screws each (from above). If the tracks ever start pulling up, I can epoxy them in later, but I don't anticipate any problems. You shouldn't really be torquing those hold-downs anyway- just enough to hold the part.
The hold-downs slide in the t-track on hex-heads. They're not t-bolts but they work fine. The aluminum sub-fence is well made and also slides easily on the t-tracks.
The only issue I have is the fault of the drill press, not this table. When you turn the handle to raise/lower the table, it hits the table itself, so I had to slide the Peachtree table off (from the bottom t-track), set the table height, then slide it back on. It's clear to me that this will be a problem no matter which after-market table you get for this Delta drill press. I'm thinking I can probably rig some sort of ratcheting handle so I can make adjustments using half-revolutions instead of full revolutions. Or maybe a smaller handle (star knob?).
I considered the Woodpecker table before purchasing this one, but it won't fit a 12" drill press. Also, the price starts to go up once you add the accessories. I also looked at cheaper tables, but they weren't nearly as well made. If you need a basic, sturdy, accurate drill press table, I recommend this table without reservation.
The table came very well packaged, is solid, and was super easy to mount on my Delta DP300L 12" drill press using the t-track on the bottom of the table. The only "assembly" required is fastening 3 t-tracks with 5 screws each (from above). If the tracks ever start pulling up, I can epoxy them in later, but I don't anticipate any problems. You shouldn't really be torquing those hold-downs anyway- just enough to hold the part.
The hold-downs slide in the t-track on hex-heads. They're not t-bolts but they work fine. The aluminum sub-fence is well made and also slides easily on the t-tracks.
The only issue I have is the fault of the drill press, not this table. When you turn the handle to raise/lower the table, it hits the table itself, so I had to slide the Peachtree table off (from the bottom t-track), set the table height, then slide it back on. It's clear to me that this will be a problem no matter which after-market table you get for this Delta drill press. I'm thinking I can probably rig some sort of ratcheting handle so I can make adjustments using half-revolutions instead of full revolutions. Or maybe a smaller handle (star knob?).
I considered the Woodpecker table before purchasing this one, but it won't fit a 12" drill press. Also, the price starts to go up once you add the accessories. I also looked at cheaper tables, but they weren't nearly as well made. If you need a basic, sturdy, accurate drill press table, I recommend this table without reservation.
Page 1 of 2
