SharkBite 3/4 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT and HDPE Pipe, 22185-0000LFA
Key features
- •INSTALLS IN SECONDS: Requires no special tools, no soldering, no crimping or glue; Just push to create a watertight seal
- •COPPER, PEX, CPVC, PE-RT: SharkBite Ball Valve plumbing fittings fit Copper, PEX, CPVC and PE-RT Pipe and connects them in any combination
- •PERFORMANCE: SharkBite fittings are certified to 200 PSI and 200 degrees Fahrenheit and can be reused up to 4 times
- •QUALITY: Only SharkBite's quality and performance is field-proven with more than 550 million connections; SharkBite is the only push-to-connect brand than can ensure a clean, leak-free connection
- •RESIDENTIAL and COMMERCIAL: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
SharkBite 3/4 Inch Ball Valve, Push to Connect Brass Plumbing Fitting, Water Shut Off, PEX Pipe, Copper, CPVC, PE-RT and HDPE Pipe, 22185-0000LFA
List Price: $49.92$44.93DEALYou Save: $4.99 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It October 25, 2026In Stock (8)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
The way to go with plumbing repairs!
dimitri44✓ Verified Purchase•April 2, 2018
If your repairing old plumbing or adding a valve this is the way to go. This valve eliminates potential sodering problems resulting from water in the line. Also you really don't need all the fancy tools that they say to buy with it. However, the removal tool might be worth having. Just debur the ends of the pipe and leave about one inch for the valve.
Reliable and easy to install
S. Lionel✓ Verified Purchase•February 20, 2018
I've been using SharkBite products for years - they are super-easy to install, work with copper and PEX, and (in my experience) are leak-free. I used this one when reworking the main feed to my house, which had a split to an outside faucet. I replaced the old, corroded washer-type shutoff with this ball valve. I never cease to be amazed at how easy these are to work with.
I'm not really sure what to say. SharkBite fittings ...
MisterMK3✓ Verified Purchase•October 27, 2017
I'm not really sure what to say. SharkBite fittings work. That's all there is to it. They don't leak, corrode, fail internally, or do anything else but work. This is all provided that you follow instructions (clean, deburr, cut square), but I'll take these over soldering in just about any situation.
Sharkbite is the answer to us non plumber members of ...
Michael L. Swift✓ Verified Purchase•April 29, 2017
Sharkbite is the answer to us non plumber members of society. I pressed it on and it worked. I have since used other Sharkbite connections. Make sure to get the removal tool along with the other items
I've tried sweating joints and have found that I'm not too good at it
Rick in Columbia, SC✓ Verified Purchase•January 3, 2017
What can I say? I have never had a problem with sharkbite fittings. I replumbed my entire house, and used these to replace the CPVC low quality valves, or brass sweated gate valves in the process. I put in numerous valves in addition to the scheme installed by the original plumbers. Water or moisture around the joint? No problem with these. I'm a DIY'er and think these are well worth the money. I've tried sweating joints and have found that I'm not too good at it. These are the solution, particularly when making tie-ins and when connecting unlike-materials.
Page 1 of 2
Related products
Banjo V300FP Polypropylene Ball Valve, Three Piece, Full Port, 3" NPT Female
List: $181.86$163.67DEAL
