Magnum MEAGSN Automatic Generator Start Controller

Magnum MEAGSN Automatic Generator Start Controller
Magnum MEAGSN Automatic Generator Start Controller
Magnum MEAGSN Automatic Generator Start Controller

Key features

  • STATUS Indicator: a bi-color (green or red) LED indicator that illuminates to provide information on the AGS's operation
  • Wiring Terminal Block: 8-port friction-fit connector that powers the AGS and connects the generator's start/stop and run sense wires
  • NETWORK Connection Port: RJ14 port that provides the connection point for the network communication cable
  • REMOTE Connection Port: RJ14 port that provides the connection point for the remote temp sensor cable
  • Internal Access Screws: four #6-32 x 3/8 Phillips screws that must be removed to access the DC Input Jumper and the 4-position DIP Switch
  • STATUS Indicator: a bi-color (green or red) LED indicator that illuminates to provide information on the AGS's operation
  • TEST Button: a momentary pushbutton that allows the AGS system to be tested for correct wiring and generator start/stop operation
  • Wiring Terminal Block: 8-port friction-fit connector that powers the AGS and connects the generator's start/stop and run sense wires
  • Mounting Flange: used to secure the AGS to a shelf or a wall. Four black oxide #8 x 3/4 Phillips, pan head screws are provided to mount the AGS
  • READY Indicator: a green LED indicator that illuminates to signal that the AGS is powered
  • NETWORK Connection Port: RJ14 port that provides the connection point for the network communication cable
  • REMOTE Connection Port: RJ14 port that provides the connection point for the remote temp sensor cable
  • Internal Access Screws: four #6-32 x 3/8 Phillips screws that must be removed to access the DC Input Jumper and the 4-position DIP Switch
  • Selectable cabin temperature for genstart: 65-85 °F
  • Selectable battery voltage for genstart: 10-12 VDC or 20-22 VDC
  • Selectable generator run time: 1-5 hours
  • Clock: Adjustable 24-hour clock

Magnum MEAGSN Automatic Generator Start Controller

List Price: $445.33$400.80DEALYou Save: $44.53 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (4)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection

Customer Reviews

Reviews sourced from verified Amazon purchasers
4.4
out of 5
Based on 9 reviews
5
78%
4
11%
3
0%
2
11%
1
0%
Be familiar with how your generator start/stop (switching and timing) works to wire it properly.
George CApril 3, 2018
The unit was easy to physically install and works great. If for some reason we lose shore power, the gen will start if it gets too hot inside the RV.
However it was a little tricky to wire up to the generator start-stop switch. Even though I have a common set-up, and is mentioned in the instructions there was no information on how to wire it properly. The instruction did fully explain the operational function of the MEAGSN internal switching so it was not difficult to figure out what needed to be done.
Five Stars
Robert W.February 4, 2018
Anything from Magnum will be great. THER SERVICE AFTER THE SALE IS THE GREATEST.
Four Stars
BobMay 1, 2017
it came
Five Stars
across1975March 11, 2017
Works great!!
Five Stars
jude landryNovember 1, 2016
Great ags
Page 1 of 2

Related products