Very nice product. Packaging was good, no bangs or dings. Direction for installation are somewhat questionable, I swayed a bit when it came to the rear stabilizing mount.......the direction appear to suggest on mounting the bracket on the inside lip of the rocker panel, however this allowed the center of the rail to contact the vehicle causing a rattle and would lead to damage. I mounted the bracket to the outside of the rocker panel promoting a uniform space between the front and middle of the rail. I may have mis read the direction, but I spent about 1-1/2 hours on the first side because of it. The second side....once I tossed the instruction and did it my way took about 15 mins. The other issue I encountered was concerning the bolts provided for replacing the factory body mounts bolts, the new bolts did not have a shoulder on them and pressure against the bolt was required to get it to start back into the body. To remedy this issue I put some small nuts into the socket as shim stock to stop the bolt from slipping into the back end of the socket, this allowed for the pressure I needed. Installed bars by myself in 2 hrs or so. Rails appear very sturdy, and add a little bit of "Growl" to JK!!!!

Love the steps but need more of a step drop

These arrived packaged very well and were exactly as described by the seller. They were a bit tricky to install, but not too bad. They look fantastic on my Wrangler, and seem very sturdy and durable.

Was looking for the slightly aggressive, but, low profile step for my 2014 Sport. RAMPAGE hit the mark with this well made and very sturdy product. It has the look I was after and at the right price. I installed both steps, alone, in about 45 minutes. Super easy!!! They hold my 220 lb. frame well. Was suppose to take 4 to 7 days for delivery. Got them in two days. If you're looking for a set of steps for your Wrangler I highly suggest this RAMPAGE product for looks, functionality and price.

Purchased this on Monday with Prime and arrived yesterday. Well packaged and all parts were included. The bars include 8 bolts (4 per side), including large bolts for the front and middle connections and 2 small for each of the rear connections. Note that the large bolts actually do screw into the body frame and will require you to remove the existing frame bolts. Rest easy, just requires a large socket and some strength. When installing the large bolts, you will need a little extra work to get them through the rubber bushing on the frame, but they go in fairly easy. The back two bolts will screw through a bracket into the existing open holes on the bottom of the body. Having two people makes the job alot easier and is heavily recommended. The bars look great and I bounced up and down on them and I am not a small guy. They are powder coat finished, so I am guessing will require paint touch up every year or so, especially to protect the steel from rusting. But they look great and add a rugged touch to the jeep over the standard running boards or pipe-style side steps. Low profile and the steps are great for kids getting in the back. Only been day 2, but highly recommend. Installation took about an hour and a half at a leisurely pace with two size sockets and an adjustable wrench.