These swing set frame brackets are very sturdy and well constructed. For my swings, I used a 4" x 6" x 10' treated beam with four (4) 4" x 4" x 10' treated support posts (the actual cut-measured sizes are a bit smaller). Since the beam and posts need to fit into the brackets, you want the lumber you choose to be as straight as possible. I rounded the edges of the posts with a sander to smooth any rough edges. This brought the beam height somewhere between 7 and 8 feet once assembled (which was a good height for both kids and grown-ups; however, I needed to add some links to my swings to lower them somewhat). I used 2-1/2" 5/16" galvanized lag screws and 5/16" galvanized flat washers after predrilling holes. You need 28 screws and washers for attaching the posts and beam to two (2) of these brackets. It may not be necessary, but I also added a couple of side pieces for stability.

The brackets are a tight fit which is better than if they were too loose. For this reason, you should expect to need to tap them onto the top beam (I did this first). Use a wooden block across the end to hammer against so that the bracket isn't damaged. If you are also adding swing hardware, fit the end posts first so that you can better tell where to add them. I was able to add three (3) swings (two regular, one toddler/baby swing) to the beam. I'd suggest adding the swing hardware before attaching the posts. It's easier to drill holes for the brackets before adding the post legs. For the four (4) posts, I also wound up having to tap them in before predrilling holes and screwing the bracket to the posts and beam.

After assembling the brackets, posts, and beam, the swing frame will be pretty heavy. You may need a couple of people to raise it up from its side. It's easier if you slide a work table or something underneath to raise it part way up to give yourself better leverage.

No regrets at all! This bracket was perfect! It is very solid. It looks professional, and the wood fit snug but not so tight that I had to hard time getting it in.

This will add 2' extra to the length of your set. 4' if you're using 2. I'll have to rethink my design. It also doesn't come with the screws, which cost more than you might think. If the wood isn't completely dry, and it doesn't generally come that way, you might find yourself looking for a way to shave it down a little. Not easily accessible to your average family. I intend to slide this 4' in from the end of my beam, which means I'll be doing a lot of sanding. I noticed their logo was scraping the wood on the inside, so I had to chisel it off too. This project seemed like a fairly simple task, but I've had to make several trips to the store for things I hadn't counted on including hardware and a sander. (My swing brackets didn't include hardware ether). On the positive side, this is very sturdy and there is no question in my mind that it will be very safe. This company also sells a set of 2 of these, hardware included, for a slightly better price than 2 of these. I'll update with pictures if I ever get these to fit my board.

Everyone asks me where I got these from, looks pro, very strong and give me a piece of mind feeling when my kids are swinging 12ft in the air! Wood might need some slight sanding to make it slide into place. But these are powder-coated and look great even after a long summer of Florida rain!

Good job,so good