SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC
Key features
- •Has been assembled, and electrical test passed.
- •Led indicator for each relay.
- •FR-4 Fiber glass PCB (Double Layer); Size: 155 x 55 x 24 mm (approximately 6.1 x 2.17 x 0.95 inch)
- •Input control signal voltage: 0V - 0.5V Low stage (SSR is OFF), 0.5V - 2.5V (unknown state), 2.5V - 20V High state (SSR is ON); SSR Output (each channel); Load voltage range: 75 to 264VAC (50/60Hz); Load current: 0.1 to 2 AMP
- •Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
SainSmart 8-Channel 5V Solid State Relay Module Board for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC
List Price: $36.65$32.99DEALYou Save: $3.66 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.1
out of 5
Based on 20 reviews
5★
70%
4★
20%
3★
0%
2★
0%
1★
10%
Works great with Raspberry PI 3
Brad✓ Verified Purchase•January 28, 2018
The relay works good and is fairly easy to setup. I used it on a Raspberry Pi 3 with LightShowPi for my Christmas lights. The only complaint I had, was the terminals for the high voltage are not soldered on straight and move quite a bit. If you use too stiff of wire it feels like it could easily pop the terminal off.
Works great with Raspberry PI 3
Brad✓ Verified Purchase•January 28, 2018
The relay works good and is fairly easy to setup. I used it on a Raspberry Pi 3 with LightShowPi for my Christmas lights. The only complaint I had, was the terminals for the high voltage are not soldered on straight and move quite a bit. If you use too stiff of wire it feels like it could easily pop the terminal off.
Works great with Raspberry Pi
Anthony A.✓ Verified Purchase•December 17, 2017
Used this to rapidly switch a bunch of LED christmas lights using the GPIOs of a Raspberry Pi on the control pins of the relay board.
Works great, GPIO on the Pi is 3.3v and it switched the relays with no issues.
Relays say Omron on the side, good PCB design.
My LED lights were only 5V, so I can't say how well the board works for mains voltage, but for my use case it worked really nicely.
The indicator LEDs on the board itself were really handy for testing my code before actually wiring it up to a bunch of lights.
Works great, GPIO on the Pi is 3.3v and it switched the relays with no issues.
Relays say Omron on the side, good PCB design.
My LED lights were only 5V, so I can't say how well the board works for mains voltage, but for my use case it worked really nicely.
The indicator LEDs on the board itself were really handy for testing my code before actually wiring it up to a bunch of lights.
Works great with Raspberry Pi
Anthony A.✓ Verified Purchase•December 17, 2017
Used this to rapidly switch a bunch of LED christmas lights using the GPIOs of a Raspberry Pi on the control pins of the relay board.
Works great, GPIO on the Pi is 3.3v and it switched the relays with no issues.
Relays say Omron on the side, good PCB design.
My LED lights were only 5V, so I can't say how well the board works for mains voltage, but for my use case it worked really nicely.
The indicator LEDs on the board itself were really handy for testing my code before actually wiring it up to a bunch of lights.
Works great, GPIO on the Pi is 3.3v and it switched the relays with no issues.
Relays say Omron on the side, good PCB design.
My LED lights were only 5V, so I can't say how well the board works for mains voltage, but for my use case it worked really nicely.
The indicator LEDs on the board itself were really handy for testing my code before actually wiring it up to a bunch of lights.
Great for simple controls
J Prince✓ Verified Purchase•December 12, 2017
A great addition to the Christmas Light control system! Thousands of uses, easy to control. I will be replacing my electromechanical relay boards with these next year.
Page 1 of 4
