So far so good. Install wasn't too bad. Most challenging part of it was making the factory u-bolts line back up. You totally remove factory shocks. The new heavy duty leaf springs won't have a need for the current shocks. Just completely remove. All in all, probably 1.5 to 2 hours for swap. Total of 10 bolts to remove including wheel lugs. Pretty simple diy project and a big difference in ride strength. I changed my factory out because I added 12" wheels and was getting rubbing on the body with riders on rear seat. These springs have cured that issue. I would recommend. Ride isn't much tougher than stock, but yes a little more firm. Good luck.

Great product generall easy to install. I had some issues getting the old spring loose from the front hanger on one side. Leaking battery acid corroded the bolt and froze it in the metal sleeve that runs through the spring. The 13MM nut came off OK but the bolt would not come out of the hanger. Had to cut both ends of the bolt off with an angle grinder and drill out one side of the through bolt. Used a big crescent on the spring to twist it out of the hanger. Just an FYI to plan for if you see where battery fluid has leaked onto the front hangers

Easy installation, but be aware when you install on the passenger side the axle will move forward making it a little more challenging to align the center bolt with hole in the axle pad. Not a big deal, just a reminder. Good suspension travel and I do not notice any change in the ride. Great choice for added weight in the rear seat.

I am in the process of building my "rat-rod" golf cart... I wanted to have a much more stout suspension for this project and went with these HD springs. They worked out just right - Installation was easy - i did however have to work at getting the front bolts out of the old springs. They were corroded to the sleeve pretty good - but a couple of good raps with a heavy hammer did the trick. This phase of the build did include new tires and a 6 inch lift (see pic). Shipping was fast - the package arrived in decent shape - however the Styrofoam in the box was shredded (no worries) they were unharmed and all the hardware was there. Overall happy with my purchase and would buy again for the next build.

Glad i opted to put these on with my 6" lift kit. Makes for a smoother and quieter ride. Only issue is the leafsprings center bolt is not exactly center between bushings so it can only go on 1 direction and there is no notification telling you forwards or backwards. I guessed a couple of times before i got it right. Just pay attention to existing leafsprings direction when disassembling them, that eill help installing the new ones.