Worked perfect for my schoolie. Had to trim the tray a little to fit snug and level.

The generator shown weighs 135 lbs and the MORryde SP60-044 handles it with ease.
Easy to pull out and closing latch is solid.

The media could not be loaded. Very nice high quality love it

If you are thinking of swapping out from 2 bat. tray and going to 3 batteries it is possible but as others have stated the smaller tray is a bit wider and it's not as easy as it sounds but can be accomplished. In my case the original tray was welded to the RV frame but there is a way with out cutting welds. There is approximately 1/2" difference in overall width (between the MORyde 2 battery tray and the MORyde 3 battery tray) which gives just enough room to drill out the slide rivets and drop the new tray frame and all into the old existing wider frame. Then I drilled and bolted directly to the existing tray frame and it worked out great. There was just enough clearance in front and back to just about center the new tray in the old location so the weight of three batteries is balanced over the steel frame.
I am an avid dry camper but still want some TV and news in the evenings and 2 batteries just don't seem to hold up to the inverter usage. Hope this helps anyone attempting the same switch over.

Not an easy install if you have no sides to attach it to. You will have to install side sturdy rails to attach the drawer. The battery wires will probably have to be replaced or extended if you want the drawer to come all the way out. You need to be mechanically inclined or else you need to bring it to a professional installer. Slightly expensive for the drawer in my opinion.