Fixed my fan problem on my 2009 Fi50 lariat in 10 minutes. All you need is a 8mm socket to remove the 2 screws that hold the old controller in place and install the new one! The controller is located on the fan body behind the glove compartment.

My wife owns a 2013 Ford F-150. The a/c blower would suddenly stop blowing while driving and wouldn't come back on until you stopped the truck and turnef the truck off and back on. I replaced this part and it fixed the problem. It's on the right side under the dash. It Takes less then 10 minutes to replace.

Fixed the issue I had on the auto climate control on my 2010 Expedition. The issue was the fan would not work at all. Now it works as it is supposed to.

Used this for my 2010 Ford Expedition Limited. Blower initially stopped working every once in a while and then eventually stopped working completely. This was a very easy installation, only took me 10 minutes. Fit perfectly and electrical plug connected with easy. Appears to be an exact ford part just manufactured using white plastic instead of black.

I purchased this for my 2010 F150 Lariat after reading reviews. My blower fan would only blow at one speed. I have a digital display with dual temperature control and the fan speed looks like bars increasing in height (like cell phone signal). The bars would move when I would increase and decrease the desired fan speed but the fan would not respond.

Remove two 8 mm coarse thread screws behind the glove box with a small socket wrench to unplug the original unit and replace, voila, I'm back and running. The whole install took 5 minutes and I'm convinced this saved me a few hundred dollars.

Just don't bump any of the other wires... I must've slightly unplugged something in the process because my trucks security system locked me out and would not let me start the ignition. I went back behind the glove box and pushed all the wired connections together to make sure they were tight and it started the first time.