Okay I love the idea of not having to wax or sealant after polishing. In reality it is not a great wax or a great polish. It does do good at polishing with a so so wax but not enough to really protect the new finish... the polish is good but is a extremely light polish that will fail to remove anything but the lightest swirls. It does work and is kind of a stand alone product. It is something that is great for a detailer. It will remove very minor defects while giving that polish shine and leaves a light synthetic wax coating. Still to get any real wax shine u will need to add a coat of real wax. Preferably synthetic to further seal it. If carnuba is Desired it should not be applied after the synthetic sealant(wax) goes on.

The best AIO I have used. As a dealer, I use an AIO product from a very large direct seller who delivers to dealers; however, this product is much better. I used this on a personal vehicle and the results were outstanding. A super glossy shine as advertised. I followed the instructions exactly. We use a 6 inch DA random orbital polisher - HD recommends using this. I used an orange pad to help cure some surface defects. As per the instructions, I used very little of the product. The product goes off quickly and easily with a clean micro fiber towel.

Here are some tips to help using this product: First, the contents were quite thick and I put the bottle on black asphalt for 20 minutes before shaking and applying the product - the bottle is black so it absorbed heat. After shaking the warmed bottle, the product was a perfect consistency. I sprayed a fine water mist on the pad before applying the product to the pad for the first time. I wore disposable gloves as recommended and used a gloved finger to distribute the product on the pad each time I applied it to the pad - doing this virtually eliminates sling (product slinging onto other surfaces). If you are going to treat your black rubber and plastic surfaces, do it before applying this product (if you get some HD product on plastic or rubber, it won't show). Use only a silicone based product to treat black plastic or rubber (which I cut with 50% water to avoid the ultra high shine look). In addition, I did a very thorough wash on the vehicle and used detailing clay. The clay must be used with a suitable lubricant. I always use a new pad on every vehicle - cleaning an old pad takes too much time and an old pad can mark the vehicle surface if not properly cleaned. Lastly, do not buy the large size product unless you are a professional detailer - fresh product works best.

I detail for a living and. Polished a car last night for the first time with this product. I'm impressed no doubt. For an AIO product it does the job very well. Little does go a long way. Easy to wipe off although after about 35 minutes it does start to dry up. No problem it was still easy to wipe off. I have my go to product which is 3x this price and that one I can leave overnight if too tired to wipe off and still comes off like butter. I have no complaint at all. This is an excellent polish and saved me time from putting on a wax or sealant. IMO a sealant or way is always needed because I'm sure the sealant properties can't be that good with an all in one. Again I'm very happy with the performance. This is a car I clayed and polished last night for a customer.....no words to describe her JOY!!! P.s. it's in the technique of polishing more then the product. No product can compensate for inexperience ..

Works wonders on paint that has a lot of spiderwebs. Used this on a friends car, and the working time is on par with Menzerna FG3000...which means you have quite a bit of time before it starts dusting. Excellent for working the paint throughly and making sure you don't have to go back and do it again.

This is a really nice AIO polish. Not sure how long the sealant lasts as I've covered my cars with something else after using this stuff. As a polish it works very nicely. I think it's slightly harder to remove than Megs or some other polishes. That doesn't mean it's hard to remove. Most of it comes off easily. Sometimes there's a think layer left behind that takes a little effort to get off. I suspect this is when I've left it on too long. Even then, not hard to remove. A little washing soap or QD makes it easier, but I rarely bother.

I had a pretty well scratched up black 4Runner. I did the entire truck with this stuff and an Orange pad (no very aggressive). The truck came out looking fantastic. On harder paint I probably would have used a more aggressive pad. On the 4Runner paint it was just right.

I can't find a reason not to use this as an AIO. If you don't need the sealant consider HD Adapt. Very good experience with that as well.