Spears 464 Series PVC Snap-On Saddle, Schedule 40, 1-1/2" IPS OD x 3/4" NPT Female
Key features
- •Snap-on saddle pipe fitting to create a branch connection on a pipe
- •IPS saddle fitting with a female NPT threaded end for the branch connection
- •PVC for corrosion resistance, high strength, and less weight than fittings made from metal
- •Smooth interior finish for reduced friction and material buildup
- •Meets NSF/ANSI 61 Annex G, NSF/ANSI 372 for quality assurance
Spears 464 Series PVC Snap-On Saddle, Schedule 40, 1-1/2" IPS OD x 3/4" NPT Female
List Price: $32.82$29.54DEALYou Save: $3.28 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (3)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.1
out of 5
Based on 10 reviews
5★
80%
4★
10%
3★
0%
2★
0%
1★
10%
Great for adding thermometers for monitoring pool water temps.
Mark S.✓ Verified Purchase•September 14, 2017
Repiping an in-ground pool, I wanted to place thermometers at critical points to monitor 2 inlet water temps, combined filter water to pool heater and heated water going back to pool. Problem was, I came up with this idea AFTER I had piped the plumbing. Simple solution. I added these saddle fittings (easy to glue on). Next I drilled out a 3/8" hole all the way through to the 1.5" PVC pipe (it's got an internal stamping to center the drill bit). I added a PVC bushing to reduce the fitting to 1/2" (Use a good grade of blue pipe dope) and then added the thermometer (pipe dope also, don't tape). Thermometer here: Just $15
UEB 3 x 1/2"Stainless Steel Thermometer Moonshine Still Condenser Brew Mash Tun
Only thing I did wrong was not to calibrate the thermometers first (my readings were all over the place as a result of rough shipping). There's a nut on the back of the thermometer to do this. Put the probe of the thermometer in a cup of slushy ice water for 30 seconds, set for 0 celsius).
If I had it to do all over again, I'd use the saddle fitting again rather than installing a TEE fitting as the 3" probe sits perfectly in the water flow.
UEB 3 x 1/2"Stainless Steel Thermometer Moonshine Still Condenser Brew Mash Tun
Only thing I did wrong was not to calibrate the thermometers first (my readings were all over the place as a result of rough shipping). There's a nut on the back of the thermometer to do this. Put the probe of the thermometer in a cup of slushy ice water for 30 seconds, set for 0 celsius).
If I had it to do all over again, I'd use the saddle fitting again rather than installing a TEE fitting as the 3" probe sits perfectly in the water flow.
Great. but requires a drill
customer✓ Verified Purchase•September 4, 2017
works fine. No problems.
Great for additions to existing Irrigation Systems, being they will save you time and reduce the complexity of the job.
L.J. Conard✓ Verified Purchase•July 11, 2017
I have only utilized one. It installed and functions without a problem. My only hang-up (for using a 4 star rating), is I had installed similar fittings in the past, that seemed a little more substantial. But it seems to be trouble free and that all that's really important ! Note these type of plumbing fittings are NOT usually available in home improvement centers. Also that they are available for different sized PVC piping; i.e. 1/2, 3/4, & 1 inch feeds and branch line sizes..
One Star
Martin Kopp✓ Verified Purchase•November 21, 2016
Cheap plastic - broke as I was attempting to fit it onto PVC pipe.
Great solution
Tom S✓ Verified Purchase•June 14, 2016
Works like a charm. I will ALWAYS have some of these on hand. My only disagreement is drilling a hole after you install it. That means plastic chips in the line, clogging the downstream heads. I would definitely consider how to flush the line after drilling the hole. Considering using a soldering hole to punch the hole, careful about the fumes, of course.
Page 1 of 2
