Jancy Slugger AA3418 Short Adaptor for Drill Press
Key features
- •Reduced cost compared to an normal annular cutter
- •Drills 3 times faster than a twist drill bit
- •1/2 inch shank or for use with adaptor for mag drills or stationary drill presses
BrandJancy
CategoryDrilling Holders
Jancy Slugger AA3418 Short Adaptor for Drill Press
List Price: $61.11$55.00DEALYou Save: $6.11 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers2.3
out of 5
Based on 5 reviews
5★
0%
4★
0%
3★
80%
2★
0%
1★
20%
One Star
Craig Abram•September 25, 2017
Bent on first use.
Three Stars
Keith•July 18, 2017
It is good quality but didn't fit standard size annular cutters
Although it is my own fault, I didn't pay ...
mike Williams•March 20, 2017
Although it is my own fault, I didn't pay attention to the size of Weldon arbor (which I need 3/4". But that is my fault. The ad was not very clear and I just jumped in with both feet.
Fits Special Short Slugger Annular Cutters ONLY
Pro Fabricator•March 19, 2016
I have one of these that I purchased elsewhere. It holds a type of annular cutter that I haven't seen here at Amazon. Called a "short slugger", they have a 1/2" shank with 2 flats (just like A 3/4" WELDON SHANK, EXCEPT 1/2" DIAMETER , THEY ARE SHORT ANNULAR CUTTERS THAT CUT TO 3/4'" DEPTH MAXIMUM). I use it in my drill press. It WOBBLES in the old drill press. Still great compared to a twist drill..
Be sure your annular bits are that one special type with the 1/2" Shanks. Those are the only ones that this adaptor fits. It fits into my 3 jaw chuck drill press and holds those special cutters ONLY. They are hard to find those cutters that fits this.
Okay, update. They DO sell the cutters that this adaptor is made for here at Amazon. (confusing, because the search terms did not find them before.) Here's the link: http://www.amazon.com/Jancy-Slugger-Annular-Uncoated-Diameter/dp/B004S2MFEK/ref=sr_1_22?s=industrial&srs=5462709011&ie=UTF8&qid=1458623122&sr=1-22#feature-bullets-btf
Be sure your annular bits are that one special type with the 1/2" Shanks. Those are the only ones that this adaptor fits. It fits into my 3 jaw chuck drill press and holds those special cutters ONLY. They are hard to find those cutters that fits this.
Okay, update. They DO sell the cutters that this adaptor is made for here at Amazon. (confusing, because the search terms did not find them before.) Here's the link: http://www.amazon.com/Jancy-Slugger-Annular-Uncoated-Diameter/dp/B004S2MFEK/ref=sr_1_22?s=industrial&srs=5462709011&ie=UTF8&qid=1458623122&sr=1-22#feature-bullets-btf
Simply is miss written and does not work
Glen Murphy•December 29, 2015
I give it 3 stars simply because shipping was as as ordered. Arrived on time no issues. But if your looking for a 3/4" weldon adapter to fit standard annular cutters in a drill press. This item will not get it done. The 1/2" shank end will fit most drill presses. However the 3/4" end must be measured on o.d. because it does not even come close to fitting a standard 3/4" o.d. shank annular cutter.
