BRIS 15.4 ft Inflatable Boat Inflatable Rescue & Dive Inflatable Raft Power Boat








Key features
- •30 Days money back guarantee. All of our boats come with 3 year manufacturer warranty. Guarantee begins when product is delivered.
- •Premium Quality Materials : BRIS this model is made by 2,000 Dtex 1.2mm PVC fabric with polyester support, having excellent resistance to tearing, tension and breaking . It is a much more heavy-duty PVC fabric than 1100 Dtex 0.9mm PVC boats .
- •Seams:All seams are HEAT WELDED for perfect seaming and guaranteed to last in fresh water, salt water and extreme humidity. Most seams are quadruple overlap for maximum strength and durability and will not fall apart .
- •Features: durable marine plywood transom for outboard motor, double layers of fabric at the bottom of the tubes This allows 2.4mm of lower tube protection from sharp rocks and abrasive sands. deep V-keel with rub-strake protection for easy planing . five individual chambers, one-way drain valve with plug, built-in oarlock for easy rowing, transom stainless "D" lifting rings, eleven interior tie down stainless steel D-ring on tubes, two large tow stainless steel D-rings on bow and rear tubes
- •Included: PVC Hull, Aluminum Floors Panels, 3x Aluminum Bench Seat, Repair Kit, 2x Aluminum Oars, Carrying Bag, and Foot Pump.
BRIS 15.4 ft Inflatable Boat Inflatable Rescue & Dive Inflatable Raft Power Boat
List Price: $3039.50$2735.55DEALYou Save: $303.95 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (17)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.2
out of 5
Based on 4 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Very heavy weight boat. Also very heavy to drag ...
Amazon Customer•November 29, 2016
Very heavy weight boat. Also very heavy to drag. Plan on some sort of boat dolly. Appears well made and a lot bigger than expected. We'll see how long it holds up. Hoping for many years of fishing out of it.
nice aluminum floor & all the D rings
john chandler•July 12, 2016
This black sleek Bris, its more than i expected, 15' 4" looks bigger in person, nice aluminum floor & all the D rings, i am putting a 40hp short i think it will do fine, also putting a rubber gym mat on top of floor, will make for a quiet ride, great product.
An excellent buy for the money.
Alaska Guy•May 14, 2016
I have held off reviewing this boat until I had a chance to use it. The Good: My first impression was that the boat is pretty good quality. There are lots of "D" rings to lash things to which is nice. The wrap-around rope is very nice. The boat is very stable and has won the approval of several local fishermen who know a great deal about boats. I was worried how the boat would handle a 185 lb engine, Fuel tank, and battery, plus a big guy in the back. It does very well. One wants a good bit of weight in the front when alone, and the D rings hold the milk crate that I fill with rocks, for that purpose. My wife and I were able to drag it back into the water, with engine and gear, several feet through the sand, after getting left high and dry by the tide. It's a good bush rig. The boat rides well and is stable, and handled well with 4 good size people.
The Bad: The rear seat is too far back and interferes with the tiller handle on tight left turns, I just edge off the seat and then there's room. The seat can and sometimes does interfere with the tiller handle when I raise and lower the engine also. The middle seat/oar lock combination is better suited for rowing backwards than forwards. There just isn't any seat that's located correctly for rowing, in relationship to the oarlocks. It's doable in an emergency and I didn't get this boat to row it. The other main problem I have is that I have cavitation/aeration problems. I can't get the boat up on plane because at about 1/3 throttle or more, I lose propulsion and the engine revs, I have to slow back down. I haven't identified the problem yet, but I'd say it's getting the right motor setup for the boat, not a boat problem. There were only 2 reviews to read before I purchased the boat, one was good and the other was gibberish. Maybe I should only give it 4 stars but I'm just too darned happy with it. I'll update the review as I use it more, so far I have only 2 days experience with it in the Aleutians.
The Bad: The rear seat is too far back and interferes with the tiller handle on tight left turns, I just edge off the seat and then there's room. The seat can and sometimes does interfere with the tiller handle when I raise and lower the engine also. The middle seat/oar lock combination is better suited for rowing backwards than forwards. There just isn't any seat that's located correctly for rowing, in relationship to the oarlocks. It's doable in an emergency and I didn't get this boat to row it. The other main problem I have is that I have cavitation/aeration problems. I can't get the boat up on plane because at about 1/3 throttle or more, I lose propulsion and the engine revs, I have to slow back down. I haven't identified the problem yet, but I'd say it's getting the right motor setup for the boat, not a boat problem. There were only 2 reviews to read before I purchased the boat, one was good and the other was gibberish. Maybe I should only give it 4 stars but I'm just too darned happy with it. I'll update the review as I use it more, so far I have only 2 days experience with it in the Aleutians.
Just as described seems to be well made and sturdy needed a little more detailed assembly instructions
ron shoffit•March 17, 2016
Just as described seems to be well made and sturdy needed a little more detailed assembly instructions. Got it assembled and mounted 30 hp Suzuki on it . Haven't had it in the water yet hopefully this weekend weather permitting.Had in the ocean several times now rock fishing it has held up well fishes 4 men and all our gear just fine .Great boat for the price got a trailer for mine so I wouldn't have to disassemble it cause it's not easy.Had a problem with the seats coming off the holders .Tried turning them over and sliding them back on and the haven't come off again






