Purchased this when my oven suddenly decided to not bake things. The burners worked and that was about the only thing that did. When searching for a reason why my oven stopped working it led me to replacing the oven control board. A search on Amazon and inputting my stove's model number resulted in this board being recommended.

Installation was very easy and took about 5-10 minutes to complete. 7 screws to remove the back panel of the stove, 4 screws to remove the non-working control board, use of a pliers to grip the edge of the old overlay to remove it from the old control board, reapplication of the old overlay to the new control board, and reassembly of the oven.

One piece of advice, take a picture of the wiring locations on the old control board prior to removal or simply unplug them one at a time while immediately connecting them to the new board. There's 5 wires along the right side of the board that you DO NOT want to get mixed up. I used a pliers in removing the old button overlay and this made it extremely easy. The adhesive remained mostly intact and allowed it to be placed on the new board with some security. The overlay was further secured when I mounted the new board to the stove with the 4 screws. Some will state that you need an entirely new overlay but I would hold off on buying this $15-20 part until you know that your old one will not work.

My oven is now fully functioning for a fraction of the cost to have a repairman come out and do it.

Perfect and easy replacement, and saved buying a new range. I was able to remove the face cover from the old control board without damage by using a hair dryer and peeling it up slowly, so that's another $25 easily saved. The control board itself is a fairly simple DIY parts replacement. Six or eight screws on the back of the stove to access, four holding the control board in place, and then five wires and one multi-connector to plug in. If you're nervous about mixing up the wires take a photo of them before you unplug from the old panel.

For background, our old oven control had started shutting off intermittently, usually while the oven was on. So in the middle of cooking something, the display would go black and the oven would just turn off. And then sometime later, the clock would light back up and it would be like nothing had happened ... until the next time. If your stove works fine, and your oven heats up like it's supposed to, except your control board is on the fritz, this is what you need. (Obviously make sure it's the right one for your specific model.)

Our symptoms were that the oven would not heat and the clock/panel was dead, but the burners still worked.

Replaced the oven control board to solve the problems. The oven control board is easy to install. One difference from the old board is that the timer function shows seconds (old board only showed seconds when under 1 minute).

Hint: Taking a photo with your phone of the wires before removing your old board makes it easy to see where to hook each wire to the new board.

Saved me $700 by keeping me from buying another stove. You will need to buy the cover too because the glue will peel the backing away from your old one when you pull it off. Easy to install! Timer buzzer is a little loud and the thermostat does not seem to be exactly the same as the original one but still works great. Like learning to use a new oven/stove. Yep, "like new" I said. My wife cooks constantly or at least several times per day and bakes bread and pizza at over 500 degrees and we have used this for several months and it has been flawless.

Hope this helps!

I'm so glad I ordered this for my Frigidaire smooth top stove! The old panel overheated and started continuously beeping. We had to shut the power off to make it stop. I ordered this part (motherboard) on a Monday. It arrived within 4 days. After taking off the old board, the new board was easy to install and only took about 30 minutes top! My stove and oven are working wonderfully now. I'm so glad this was available to me and I didn't have to call a costly repairman to replace it! Best $100 I ever spent!