Would have been five stars, but since I had to re-thread the mounting brackets of the running lights, and purchase silicone to seal the inlets of wiring.. otherwise, not so bad for the doe paid, especially considering what others want in the next step up in quality, which means, ..what? ..20% better for 200% more doe... I'll do a bit a fabricating, not minding at all that I saved huge doe and they work and look good for a much lesser price!
Although this was priced very cheap comparatively, ...as any serious biker knows, the best products are a small fortune just for the simplest items, in this case, though not a top of the line product, it is rather a decent and or usable product for the lesser price tag, some modifications must be done for the install (no surprise!), which includes needing to use silicone to seal the wire inlets to the lights, as well some reinforcement to thinner steel materials for mounting, also note that anyone buying these should be able to use a thread tap due to poor production procedures, and cheap hardware, but again, if you want all to be 100%, you'll pay out the high end dollars ++ for it !!! Or in other words, if one can't fabricate, one should not buy these, for those that can fabricate, you'll get more than your buck would have bought, comparatively! Just be prepared to buy what is needed to install onto your bike, larger bolts, washers and nuts, some silicone, heat shrink, perhaps some sheet steel for actually mounting in a sturdy fashion, vibration, etc.. Every bike being different! Good Luck & Happy Trails, ...and please, always remember to ride safe, as there's additional cars and trucks not looking out for you added every day! .. signed, a loving brother & rider, mike

Like it

For the price I have found this to be an excellent value and shipping was bang on. I have installed it on two of my bikes. As always being an after market part you will need a little ingenuity to fit it. For instance I needed to open the mounting holes slightly to fit the mounting holes on the bike, as well needed to add a shim, (2-5/16 flat washers) under the riding lights to get them to tighten up properly. If you are not mechanically inclined you may want to get help with the installation from some one who is. That being said I do like the product.

Damn good product Nice metal bar going across it's fit good wires right up when you're done good price good product definitely recommend them

Cheep plastic! But looks good on my bike! bulbs are junk I replaced them with LED Man supper Bright on the road. If u buy put in LED bulbs u will love it then!