Colored Shoe Sole Kit - Slip Resistant Shoe Bottom Cover for Women's Heels (Black)
Key features
- •This kit is applied to the sole of your own heel to change the color and look.
- •Protects the shoe sole from damage with a thin rubberized layer on the area of the sole that comes in contact with the ground. This built in layer is both textured and rubberized to grip more like a tennis shoe instead of the typical smooth bottom of most heels. The rubber is soft enough not to scratch floors, but is also resilient to most oils and other chemicals. It also cleans easily to help keep the bottoms looking new.
- •Covers any damage or imperfections already on the shoes sole. It is flexible and will stretch to conform to the complex curves of most soles.
- •Self adhesive design that will work with virtually any brand shoe in any size (must have a smooth bottom with no texture or suede material). This is a complete installation kit with templates and instructions. Scissors and marker are required.
- •For wedges, flats, protectors, single and multi-packs, see our other items for sale on Amazon.
Colored Shoe Sole Kit - Slip Resistant Shoe Bottom Cover for Women's Heels (Black)
List Price: $29.00$26.10DEALYou Save: $2.90 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers3.2
out of 5
Based on 10 reviews
5★
80%
4★
20%
3★
0%
2★
0%
1★
0%
love this, it is very vibrant but I get ...
Amazon Customer✓ Verified Purchase•February 28, 2017
love this, it is very vibrant but I get asked if my shoes are Louboutin's all the time from women that own a few themselves. over all very pleased, the little pieces for the heels weren't really necessary, so I ended up using them to make a pair of my daughter's sandals into them too :)
Fantastic, great results!
Kinickie✓ Verified Purchase•September 21, 2016
This is an excellent kit, and fairly easy to do if you are patient and pay attention to detail.
The kit comes with: directions, the colored adhesive vinyl sole covers, clear contact paper (to trace the outline of the shoe sole), and alcohol pads to clean the bottom of your shoes.
You will need: a sharpie, hair dryer, water, scissors (I recommend both some regular scissors and some small beard/mustache type scissors for trimming), and a SHARP xacto knife.
Be careful when tracing the soles and cutting the vinyl as this will make installation easier and your end result better looking. Other than that, just follow the directions and take your time.
The kit comes with: directions, the colored adhesive vinyl sole covers, clear contact paper (to trace the outline of the shoe sole), and alcohol pads to clean the bottom of your shoes.
You will need: a sharpie, hair dryer, water, scissors (I recommend both some regular scissors and some small beard/mustache type scissors for trimming), and a SHARP xacto knife.
Be careful when tracing the soles and cutting the vinyl as this will make installation easier and your end result better looking. Other than that, just follow the directions and take your time.
You have red bottoms
Amazon Customer✓ Verified Purchase•May 28, 2016
I got it for my daughters prom! It was the extra touch we were looking for! I would buy it again! It was easy to apply just make sure you have a blow dryer you will need it to seal it!
Great way to upgrade heels
Sharon76✓ Verified Purchase•May 10, 2016
They were easy to put on as long as you have a sready hand, sharp exector knife and am patient. You can either trace the outline of your sole on the grid guide then transfer to the red applique, or you can apply the Red appliqué directly onto the sole and cut to shape with a sharp knife. My advise is to not remove the Red appliqué completely but to gradually peel it off the backing while you smooth the red appliqué slowly to remove air pockets and bubbles.
Not bad!
Melanie✓ Verified Purchase•February 4, 2016
Not sure what the fuss is about - I didn't find the shoe bottoms difficult to put on at all. It's a little time consuming, sure, but every good craft project is. It took me about 45 minutes per shoe. Maybe it helped that I have a lot of DIY and crafting experience.
My shoes had some raise logos on the bottom, so I sanded those down as best I could. I followed the instructions and the previous reviewer's suggestions to cut the bottoms a little larger than the pattern I traced, and used cuticle clippers to cut off the excess.
I found them quite easy to smooth on. Any wrinkles were easily smoothed out by blow-drying and pressing firmly. I only had slight bubbling around the center logos - those were easily fixed. I poked a tiny hole in the bubble with a straight pin and pressed the air out. The hole is microscopic and not noticeable. The result is shiny and beautiful, and the shoes look like they were made that way. The treads are nice and grippy. I'm happy with them.
I only take off one star because, let's be honest, they're a little overpriced for what they are.
My shoes had some raise logos on the bottom, so I sanded those down as best I could. I followed the instructions and the previous reviewer's suggestions to cut the bottoms a little larger than the pattern I traced, and used cuticle clippers to cut off the excess.
I found them quite easy to smooth on. Any wrinkles were easily smoothed out by blow-drying and pressing firmly. I only had slight bubbling around the center logos - those were easily fixed. I poked a tiny hole in the bubble with a straight pin and pressed the air out. The hole is microscopic and not noticeable. The result is shiny and beautiful, and the shoes look like they were made that way. The treads are nice and grippy. I'm happy with them.
I only take off one star because, let's be honest, they're a little overpriced for what they are.
Page 1 of 2
