Auphonix Pop Filter Screen for Microphones - Gooseneck Clamps Compatible with Blue Yeti Microphone - Great Gift
Key features
- •YOUR AUDIENCE WILL BE SHOUTING FOR MORE! You need the quality of sound first time, whether you're singing, blogging, recording a voiceover or podcast. The Pop Filter and shield has got you covered! You will sound clean and professional whilst showcasing your best voice.
- •NO DRILL NEEDED, QUICK SETUP. Designed for the 'Blue Yet' and other USB microphones with no drill needed. Your microphone pop filter comes with a flat clamp and a flexible yet sturdy 360 degree gooseneck holder to easily support the weight of the shield. It will hold at any comfortable angle and distance required.
- •LESS HASSLE, REDUCES DISTORTION. The Pop Filters double layer of mesh ensures you get the best recording every time. Get rid of those dull thuds, the p's and b's plosive sounds, spit or wind that hits the microphone at high speed.
- •EASE FRUSTRATION. Don't waste a recording, it's essential to use an Auphonix Pop Filter for all audio recordings. We ensure the best quality, you don't have to worry about a thing, but making a great impression!
- •TRY IT OUT, RISK FREE. If for any reason you are not happy with the Pop Filter we offer a 12 month money back guarantee, just let us know how we can help.
Auphonix Pop Filter Screen for Microphones - Gooseneck Clamps Compatible with Blue Yeti Microphone - Great Gift
List Price: $28.11$25.30DEALYou Save: $2.81 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.6
out of 5
Based on 10 reviews
5★
80%
4★
20%
3★
0%
2★
0%
1★
0%
Works fine with Rode PS1 with a few considerations
H. Kajita✓ Verified Purchase•September 29, 2017
No issues with the performance of the pop filter. It does what it's supposed to do: remove plosives. However, bear in mind this is specifically made to fit not on a boom arm--though it can and that's how I have it setup (Rode PS1)--but on a bigger, flat surface like the Blue Yeti Mic's stock stand.
You'll notice that a lot of pop filters have an angled clamp. That's so it can fit around the small square arm of a mic boom. This one does not fit around. And if you clamp it with the screw know facing horizontally, the weight of the filter will put excess stress on the rubber adhesive that's inside the clamp. As a result, the rubber piece will move slightly and stick out a bit. It doesn't hurt anything but IMO looks unsightly. You can reposition the rubber by heating up the adhesive with a blow dryer or heat gun (let it cool before you clamp again)
The solution to this is to clamp it veritically so that the knob is on top. This will spread the weight of the filter more evenly and no matter how tight it's clamped, the adhesive won't move.
I wish the adhesive was a bit stronger so it didn't move at all but overall, I have it optimally setup and I don't think I would clamp it this way had I not known about the adhesive.
You'll notice that a lot of pop filters have an angled clamp. That's so it can fit around the small square arm of a mic boom. This one does not fit around. And if you clamp it with the screw know facing horizontally, the weight of the filter will put excess stress on the rubber adhesive that's inside the clamp. As a result, the rubber piece will move slightly and stick out a bit. It doesn't hurt anything but IMO looks unsightly. You can reposition the rubber by heating up the adhesive with a blow dryer or heat gun (let it cool before you clamp again)
The solution to this is to clamp it veritically so that the knob is on top. This will spread the weight of the filter more evenly and no matter how tight it's clamped, the adhesive won't move.
I wish the adhesive was a bit stronger so it didn't move at all but overall, I have it optimally setup and I don't think I would clamp it this way had I not known about the adhesive.
Good price, very good performance
Timothy J. Little✓ Verified Purchase•July 23, 2017
The filter works great. My voice is dreck, but a pop-filter can't do anything for that :)
The filter attaches easily, and it is pretty adjustable (a bit stiff, but I suppose that's by design) and it arrived on-time, so what more could I want. :)
The filter attaches easily, and it is pretty adjustable (a bit stiff, but I suppose that's by design) and it arrived on-time, so what more could I want. :)
Good Filter!
EKH✓ Verified Purchase•July 7, 2017
Works just as it should. Works great with Blue Yeti mic and improves the recording quality. Mounts easily to Blue Yeti mic stand or to a table edge. Strong and stable. Well made for the price and should hold up well.
Pops Be Gone!
Gary W. Long✓ Verified Purchase•May 18, 2017
What a well-built and excellent pop filter! I'm using it as I write recording a quick podcast video. The audio quality is excellent due to the quality of the filter. Thanks!
BEST pop filter Ever!
Brandon Burket✓ Verified Purchase•January 19, 2017
This is by far the best pop filter out there. It is simple to set up and fits pretty much every mount/surface. The double mesh works even BETTER than traditional pop filters. I am very pleased.
Page 1 of 2
