Key features

• •Specifically blended for superior adhesion and durability on polycarbonate RC car and truck bodies.
• •Pearl Translucent is a non-solid, pearl finish spray that that requires backing by a solid color to achieve a non-translucent (solid) pearl finish.
• •For optimal results on RC vehicle bodies, apply one to two thin coats of Pearl Translucent, allowing each to fully cure before next application. Once fully cured, back with a solid color.
• •For a solid white pearl effect, back Pearl Translucent with Solid Bright White (DTXR4251).
• •Made in the U.S.A. using raw materials sourced in the U.S.A.
• •Sprays evenly and provides durable coverage for polycarbonate radio control car and truck bodies.
• •Custom-blended in all of the most popular colors.
• •Convenient 4.5 ounce size typically allows full coverage of almost any RC car/truck body.
• •Add brilliance to Pearl colors by top-coating, especially with a light color.
• •Many colors also available separately in conveniently sized 0.5 ounce bottles.
• •Made in the U.S.A using raw materials sourced in the U.S.A.
• •One 4.5 ounce (127 grams) Spray Can of Duratrax RC Vehicle Body Paint, Pearl White Translucent
• •Nothing
• •Duratrax PC68 Polycarb Paint Thinner 0.5 ounces (DTXR4068)
• •Duratrax PC75 Polycarb Paint Thinner 3.5 Ounces (DTXR4075)
• •Duratrax Vinyl Masking Tape 1/16 inches (DTXR5000)
• •Duratrax Vinyl Masking Tape 1/8 inches (DTXR5001)
• •Duratrax Vinyl Masking Tape 1/4 inches (DTXR5002)
• •Duratrax Vinyl Masking Tape 1/2 inches (DTXR5003)
• •Apply at temperatures between 60-80°F (15-26°C) and in low humidity.
• •Apply in thin, even coats to avoid runs or heavy build-up.
• •Do not allow paint to cure fully between coats.
• •Application of more than three coats may cause color issues and undesirably alter appearance.
• •Pearl and Metallic colors should be applied by airbrush or spray.
• •Back all Pearl, Metallic, Candy and Fluorescent colors with a solid color.
• •Metallic and Candy colors not recommended for backing Pearl.
• •Back Pearl White (translucent) with solid Bright White for optimal results.
• •Experiment on a separate piece of lexan (polycarbonate) to achieve desired look before attempting to paint a complete body.
• •Read label carefully and heed cautions before using.