DuctlessAire Outdoor Wall Bracket - Mini Split Mounting Bracket - Ductless Air Conditioner Wall Mount - Mini Split AC/Heating System Accessories for Window AC, HVAC, Heat Pump & More (9000-36000 BTU)
Key features
- •Universal Heavy Duty Outdoor Wall Bracket. Fits 9000-36000 Btu Units. Dimensions: Width: 33.5" Height: 18" Depth: 22"
- •Adjustable for use with up to 9,000 - 36,000 BTU Units not exceeding a maximum weight capacity of 350 lbs. It includes hardware for ser and expansion bolts for wall mounting
- •The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, debris, floods, vandalism, etc.
- •Two L-shaped brackets (foldable),Cross bar,8.8 grade bolts with lock nuts, Wall fixation kit, Anti-vibration feet ungraded to 1 1/2 inches tall!
- •Slight rearward tilt to wall is recommended for safety purposes. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure proper wall bracing will accommodate bracket weight load
DuctlessAire Outdoor Wall Bracket - Mini Split Mounting Bracket - Ductless Air Conditioner Wall Mount - Mini Split AC/Heating System Accessories for Window AC, HVAC, Heat Pump & More (9000-36000 BTU)
List Price: $68.08$61.27DEALYou Save: $6.81 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
80%
4★
20%
3★
0%
2★
0%
1★
0%
Works good, looks good!
Phil G.•May 20, 2017
Works good, looks good. Good paint job, and sturdy rubber mounts. A little problem is the brackets won't slide over the bolts on the horizontal bracket so just need to make sure and get them on first (which makes the installation job a little more of a balancing act).
Nice bracket, but could be better
SpaceSheep1•April 29, 2017
It's a sturdy mount, that's not hard to install. Seems to hold my 18K BTU MRCool condenser fine attached to wooden siding house.
I didn't actually mount it to the studs, because I can't locate them from outside. But I think siding plus 3/4" plywood is sufficient.
There are multiple reasons for which I took one star off.
First of all, installation manual is lacking, and plain wrong in few cases. For example, when you attach "brace bar" you CAN'T slide brackets on it, because mounting screws will block it's path! So mount just one end, slide brackets, and mound second end.
Another issue I had is because of the size of my condenser (it's narrow) I could only clear one of the top holes, so one arm is attached with 3 screws, and another one with just 2. I could've drilled new hole in metal, but I don't believe it's necessary as my condenser is not that heavy.
They say in the manual that horizontal bar doesn't support any weight, but it actually does. It probably won't work on it's own, but it does provides extra support, a lot of it.
Biggest issue (as other reviewers commented) is that when braced against wall, bottom of brackets are nowhere near level. I saw one reviewer used washers at the rubber feet, I think it's a great idea. It's probably the only way to level condenser unit.
Finally, rubber legs have extremely long threaded rods on them. There's absolutely need for this, and it makes using socket wrench to tighten them a real pain in you know what.
Overall it's a good bracket, but don't expect your condenser to be stiff, it will shake a little...
I didn't actually mount it to the studs, because I can't locate them from outside. But I think siding plus 3/4" plywood is sufficient.
There are multiple reasons for which I took one star off.
First of all, installation manual is lacking, and plain wrong in few cases. For example, when you attach "brace bar" you CAN'T slide brackets on it, because mounting screws will block it's path! So mount just one end, slide brackets, and mound second end.
Another issue I had is because of the size of my condenser (it's narrow) I could only clear one of the top holes, so one arm is attached with 3 screws, and another one with just 2. I could've drilled new hole in metal, but I don't believe it's necessary as my condenser is not that heavy.
They say in the manual that horizontal bar doesn't support any weight, but it actually does. It probably won't work on it's own, but it does provides extra support, a lot of it.
Biggest issue (as other reviewers commented) is that when braced against wall, bottom of brackets are nowhere near level. I saw one reviewer used washers at the rubber feet, I think it's a great idea. It's probably the only way to level condenser unit.
Finally, rubber legs have extremely long threaded rods on them. There's absolutely need for this, and it makes using socket wrench to tighten them a real pain in you know what.
Overall it's a good bracket, but don't expect your condenser to be stiff, it will shake a little...
Looks great. Love this and would buy again
SuperDad1000•April 20, 2017
It's been holding my one ton Mitsubishi condenser for a while now. No problems. Looks great. Love this and would buy again. I build/fab lots of brackets for installs. This is worth buying!
Five Stars
Flavio Amaral•March 25, 2017
Solid!
good product
UK Alien•November 10, 2016
I have a 200 LB AC unit installed on this bracket and not even the slightest vibration, good product
Page 1 of 2
