Supply Giant PEX-B Pipe 3/4 In x 100 Ft White Tubing for Plumbing, Potable Water Line for Home Improvement, Indoor/Outdoor Use
Key features
- •PEX Non-Barrier Potable Water Tubing is used for Residential & Light Commercial Hot & Cold Water Plumbing Applications
- •Can be installed using either Crimp or Clamp/Cinch Type Connection System
- •Strong, Flexible Tubing for Superior Performance
- •Tubing is marked every 5 feet with length, ASTM standards, approvals, certifications, pressure ratings and other technical information
- •Conforms to NSF, UPC, ASTM & Warnock Hersey Standards
- •Industry Standard, 25-Years Manufacture's Warranty.
- •3/4" PEX Tubing without Oxygen Barrier is common for the following applications
- •Plumbing applications (hot and cold water)
- •Loop radiant heating applications
- •Diameter: 3/4 Inch
- •Length: 100 Feets
- •PEX Type: PEX-B
- •Pressure Ratings: 80psi @ 200F, 100psi @ 180F, 160psi @ 73F
- •Minimum Bending Radius: 7" (Industry Standard for 3/4" PEX)
- •SDR-9 Dimensional Standards
Supply Giant PEX-B Pipe 3/4 In x 100 Ft White Tubing for Plumbing, Potable Water Line for Home Improvement, Indoor/Outdoor Use
List Price: $130.94$117.85DEALYou Save: $13.09 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 8 reviews
5★
88%
4★
0%
3★
0%
2★
0%
1★
13%
Worked GREAT ... would like to see a little more flex in line tho
FELINE-N-FEATHERS SW FL RESCUE SANCTUARY•October 16, 2017
Worked well with rest of PEX components. MUCH easier than dealing with PVC. I WISH it could be used outside .... I need to create an outdoor system for my birds to drink from at my 501c3 Rescue. PEX is indoor only!!
Like very flexible PVC and no water pressure loss at 100 feet
Everglades✓ Verified Purchase•August 5, 2017
Dug a 100 foot trench to run water to two different hose bib locations. Laid it in the sun and with a little bending will fit in a 90 degree turn. Definitely recommend the 1/2" 3/4" PEX crimp tool. With the metal copper rings with secure anything attached. No glues or thread tape. You are compressing a ring over a metal spigot or hose bib. The crimp tool has a gauge to place over the crimped section. It is either go or no go.
Regular metal C-clamps will leak no matter tight you make them.
It is not hose and not rigid PVC. It is like a combination of both and made for potable water.
Regular metal C-clamps will leak no matter tight you make them.
It is not hose and not rigid PVC. It is like a combination of both and made for potable water.
Five Stars
Leonard Dwyer✓ Verified Purchase•June 16, 2017
very good
Works perfectly. Using ProLine push fittings and I don't ...
Cutty✓ Verified Purchase•February 16, 2017
Works perfectly. Using ProLine push fittings and I don't have to replace the copper around it, I just plug and play.
PEX buyer beware!
Rick O.✓ Verified Purchase•January 24, 2016
Warning to all! This product is marked and sold as 1" PEX tubing. It measures 13/16" ID and 1 3/16" OD and it will not work with the 1" PEX fittings I purchased for it. They require 1" ID as I would expect. PEX is measured by the ID so this is really 13/16" PEX. I have used miles of PEX over the years and never encountered this size before. I am now stuck with 300' of this PEX I cannot use. Tried to return it but was told it is past the return by date. I disagree with that policy since it is not the product I ordered.
Page 1 of 2
