Replaced my 2013 F-150 XLT Supercab window w/ power slider. Worked well. Vendor forgot to send the adhesive strip. They overnighted it to make it right. Make sure you have that before removing the old window. Looked and felt OEM.

This product was exactly as expected. It fit in place with no modifications just like the original and had all of the expected connections attached to make it easy.

For the inexperienced person like me, the replacement was simple enough, but it did work up quite a sweat. It took about 4 hours including 2 trips to the hardware store. I needed at least 2 deep socket wrench sizes that I did not have, and a star bit wrench (T50 size) to remove the seat belt brackets. I got a good idea what I was getting into ahead of time by watching a couple of YouTube videos. Removing the old butyl sealer was the most tedious part. One recommendation I heard was to use isopropyl alcohol as a solvent, which kind of worked. It was mostly a matter of scraping with a razor blade and picking it off with my fingernails. The isopropyl alcohol was most useful for cleaning off my hands afterward. I lifted the window into place just fine by myself, but would have had an easier time with a helper, especially to prevent the new butyl sealer from brushing up against parts of the car and sticking, albeit temporarily.

The electrical connections were simple plug-in connections. No soldering or twisting of wires. After putting everything back together, it looks just like the original.

Exactly what I asked for. Instructions with torque spec and tightening pattern would be helpful.

Would of given 5 stars but for the fact that the connection for the power window motor was wrong and had to cut and connect wires directly to the prongs on the motor

Would certainly buy this product again, hopefully won't have to.