E3D V6 All-Metal HotEnd Full Kit - 1.75mm Universal (Direct) (24V)
Key features
- •E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (Direct) (24V).
- •The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance.
- •Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more.
- •Original E3D package. Assembly instruction available on E3D website.
- •Fast free shipping from 3DMakerWorld (Continental US)
- •1 x Aluminium Heatsink (Contains brass embedded bowden coupling ring pre-fitted in top)
- •1 x Stainless Steel Heatbreak
- •1 x Brass Nozzle (0.4mm)
- •1 x Aluminium Heater Block
- •1 x 100K Semitec NTC thermistor
- •1 x 24v Heater Cartridge
- •1 x 24v 30x30x10mm fan
- •1 x High Temperature Fiberglass Wire - for Thermistor (150mm)
- •2 x 0.75mm Ferrules - for Solder-Free Wire Joins
- •4 x Plastfast30 3.0 x 16 screws to attach the fan to the fan duct
- •1 x M3x3 socket dome screw and M3 washer to clamp thermistor
- •1 x M3x10 socket dome screw to clamp the heater block around the heater cartridge
- •1 x Fan Duct (Injection Moulded PC)
BrandE3D
Category3D Printer Extruders
E3D V6 All-Metal HotEnd Full Kit - 1.75mm Universal (Direct) (24V)
List Price: $116.80$105.12DEALYou Save: $11.68 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers5.0
out of 5
Based on 4 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
Worked as intended. No complaints here, upgraded to ...
chace potter•December 30, 2017
Worked as intended. No complaints here, upgraded to Titan Aero but kept this for another printer. Used for a few months without any problems
Five Stars
Alden•August 26, 2017
This is an Original E3D v6 Kit not a clone.
Five Stars
chace potter•June 6, 2017
Great hotend, does what I want and need. No problems
Best hot end I've ever used
TeeJ•June 25, 2015
Great hot end, this is my 3rd E3D and I have yet to have a major problem with one. I'm not a fan of the thermistor that comes with it (more personal choice than any kind of flaw), but this one: http://www.amazon.com/gp/product/B00THZJIY8?redirect=true&ref_=cm_cr_ryp_prd_ttl_sol_9 screws right into the heating block, and works with Printrbot or Makergear printers without having to recompile the firmware.
