With its big wheels..reduces the risk to fall on gravels or sand on the floor comparing the small wheel radius or in small gutters too..but still after 2 to 4 rides i need to remould it for the correct fitness

It may work for other people but i felt a pinch on my left foot. And i tried everything to not feelnthe pinch. I tried no sock, thin sock, heavy socks, long and short socks, but nothing work

Overall thease are great skates. I would definitely recomend these to any of my inline skating friends. The wheels work great when you wear down the shine and look great. The skate comes put together which is a really convenient except for when you go to heat mold. The frame and boot are very solid and fit great after heat molding. My only complaint is that the paint in the boot has been coming off. Plus there's allready a gash in the boot just from droping the skate tool on it. Other then that this is a great skate especially if your all ready acustumed to recreational inlines like most people have and are looking to get into a speed skate. 9/10

Love these skates

Buyer Aware, Warranty of this product does not exist.
Drop to one star due to defective and TEKFLY blame I baked the inline skates incorrectly.

The defective inline skate acted strangely in the beginning, the carbon fiber part always loose up. It failed to hold the lower ankle, therefore one of my feet skate like drunk.

After baking for 5 times, follow by their instruction 180F-200F(used 180F), 8 minutes each side, I realized one of the inline is defective. Filed a Claim, TEKFLY reply with a short answer: can you send us some photos? Replied with photos, dead silences from the other side.

Second claim filed, wrote detailed information, describe how it is not working property. No reply from seller.

Third time I filed a claim for defective, TEKFLY blame I baked it incorrectly.

If you know how to contact amazon for this issue, leave a comment below, I will keep things update on the top.

=========Original=========
Very good Inline Skates, for one of my foot. The other one just does not hold its shape after heat molding.

The Inline Skates can fit my feet very well after I baked them at 180F. I included the photos during the heat molding process. Pre-heat oven to 180F, bake both side for total 15 -20 minutes. They fit so good! They feel just right. I even have measurement of the width before and after.

But not so fast. The carbon fiber part and the part inside the inline skates will loosen, it does not hold its head molded shape anymore. I can lose balance easily since it does not have support, hence tilted left or right during skating.
I took pictures and create an video about before and after.

Thought about the Vanilla ABEC-9 bearing: If you are serious about skating, change it right the way, don't even break it in. I can go 18 MPH MAX on Vanilla ABEC-9 after serious works: Clean by citrus 2 times, 2 drops of bones speed cream. They definitely required those works before you use them. The bearings I have are noisy, 2 out of 16 bearings don't want to turn fast, another 2 out of 16 makes noise, probably by dirt.

I can easily go up to 25 MPH after change it to Bones REDS.

Just have to wait for vendor's reply if they are going to replace my left inline skate. I cannot seriously think about I have to bake one of my inline skate for every 2 miles.