Geilienergy Sub C Subc 3300mAh NiMh Rechargeable Battery for Power Tools (w/Tabs) (Pack of 15)
Key features
- •❤High quality Sub C Size rechargeable NiMh battery.
- •❤Designed for enhanced performance for high drain applications
- •❤Provides long use time per charge with this high 3300 mAh capacity
- •❤Enable cost effective and easy way to make your own power pack of different voltage and shape
- •❤Dimensions (Diameter x Height)23 x 43 mm
Geilienergy Sub C Subc 3300mAh NiMh Rechargeable Battery for Power Tools (w/Tabs) (Pack of 15)
List Price: $64.58$58.12DEALYou Save: $6.46 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.2
out of 5
Based on 10 reviews
5★
60%
4★
20%
3★
0%
2★
20%
1★
0%
Four Stars
Amazon Customer✓ Verified Purchase•May 9, 2018
Ordered for someone else
If You Can Solder, You can make These Work
rsa✓ Verified Purchase•January 1, 2018
Strapped these together with soldering iron to replace all but dead batteries in a 10 y.o. Bissell cordless sweeper. Much more cost effective than any other places I researched.
Great batteries, able to deliver the specified 3300mah of current under 10A load. I plan to buy another set.
Amazon Customer✓ Verified Purchase•July 6, 2017
UPDATE: Several months after buying, these batteries continue to hold their capacity. I have put them through several discharge/charge cycles and they have maintained their 3000mah rating very well.
These are great batteries that meet their specifications.
I built a 12V pack out of them (10 cells) and tested it against a 9-10A static load.. The batteries were able to deliver the full amperage for over 20 minutes - this is the expected run time for a 3300mah battery under an average load of ~9A.
I will be buying more of them to build more battery packs for my robotics project.
Highly recommend.
These are great batteries that meet their specifications.
I built a 12V pack out of them (10 cells) and tested it against a 9-10A static load.. The batteries were able to deliver the full amperage for over 20 minutes - this is the expected run time for a 3300mah battery under an average load of ~9A.
I will be buying more of them to build more battery packs for my robotics project.
Highly recommend.
They work great on the first few runs although the sticker on ...
J B✓ Verified Purchase•June 14, 2017
Replaced the NIcad batteries in my dewalt drill battery case. They work great on the first few runs although the sticker on mine were backwards to the polarity to the battery. Not a big deal just have to either meter them to make sure you install them right.
Save your money and get Tenergy
Jet Mech 1✓ Verified Purchase•April 19, 2017
Bought these to rebuild my Craftsman 19.2 drill battery pack. Tested a few and showed 1.25 volts, so went ahead and assembled the pack. After assembly, I put the pack into my charger. Charger would not accept the battery pack and the defective light on the charger was illuminated. Dissambled and started checking each battery. Almost everyone of them (11 to be exact) showed zero volts and some were even in cell reversal showing about -120 mv. I know from experience when I performed a deep discharge cycle on the original nicads to remove the "memory" that if I over discharged the pack, the charger refused to recharge the pack. I had to manually put some charge into the pack using alligator clips from a 12 volt DC voltage source. Then the charger would go ahead to work. These batteries should have never been sold. You shouldn't have to attempt to rejuvinate each cell before they're put into service. Amazon made it right (as usual). I won't ever use this brand again. Also, the tabs are very thin. Very easy to tear them. Just a note on my experience level: I am a retired aerospace technician and worked in the battery shop for quite some time. I have assembled many packs.
Page 1 of 2
