CASEMATIX Home Video Projector Hard Case Compatible with PowerLite and Home Cinema DLP WXGA 1080p 3D Projectors for Select Models Pro EX9200, 1781W, 1761W, 1284,640, 740HD, 1040 and More, Case Only
Key features
- •Protection against IMPACTS, DROPS, DINGS and DUST. Great for storing and protecting your projector and accessories
- •Hard exterior made of durable composite injection plastic. Internal Tri-Layer foam cushioning with Pick & Pluck customizable layer
- •Case consists of latch double latch closures and a slot for accommodating padlock security
- •Easily Fits Projectors and Accessories with Maximum Dimensions: 13.0" x 10.0" x 4.2" ; External Dimensions: 16.0" x 13.0" x 6.0"
- •MADE in the USA
CASEMATIX Home Video Projector Hard Case Compatible with PowerLite and Home Cinema DLP WXGA 1080p 3D Projectors for Select Models Pro EX9200, 1781W, 1761W, 1284,640, 740HD, 1040 and More, Case Only
List Price: $96.60$86.94DEALYou Save: $9.66 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
40%
4★
30%
3★
20%
2★
10%
1★
0%
Good, but thin
Frederick L.•December 2, 2017
After my first heavy use at a conference with many speakers, and re-sets, I need to find a way to have the precut sections be not so 'teary'. But it seems pretty good overall, especially for the price. I have not contactd the comapny yet, so I can't fault them without checking in with them
The plastic seems a bit thin, but it held up well under moderatly stressful conditions.
Bottom lione - It kep my projector safe and secure
The plastic seems a bit thin, but it held up well under moderatly stressful conditions.
Bottom lione - It kep my projector safe and secure
Not as good as reviews say. Has a few issues you should know about.
Mark B•November 8, 2017
Well, not so sure about all those great reviews. Here are my issues with this product:
1) As with many of these cases, you needed to pull out the extra foam to custom fit the case to the projector. That's fine. However with this case, the pieces of foam ate generally loose, so over time as you use the case and remove/replace the projector, those surrounding pieces get loose, crushed, and fall out. Eventually the projector gets loose.
2) There is enough room for an HDMI cord, power cord, and USB cord. If you don't need the the HDMI or USB cord, then you can fit the remote as well. But if you need those cords, the remote has to be stored in a separate place.
3) The latches are thin and flimsy. The case is a little challenging to close when full, and when you press down and try to latch it, the whole latch comes off. It is only secured by pressing the latch onto a hinge.
1) As with many of these cases, you needed to pull out the extra foam to custom fit the case to the projector. That's fine. However with this case, the pieces of foam ate generally loose, so over time as you use the case and remove/replace the projector, those surrounding pieces get loose, crushed, and fall out. Eventually the projector gets loose.
2) There is enough room for an HDMI cord, power cord, and USB cord. If you don't need the the HDMI or USB cord, then you can fit the remote as well. But if you need those cords, the remote has to be stored in a separate place.
3) The latches are thin and flimsy. The case is a little challenging to close when full, and when you press down and try to latch it, the whole latch comes off. It is only secured by pressing the latch onto a hinge.
Solid buy.
Douglas Taylor•August 21, 2017
The case is a little burly for the Epson Home Cinema 640 that I bought with it, but it looks like I could drag the case through the office, up a flight of stairs and the projector would fire right up. The pull-apart foam is a little hokey, but it fits nicely, so maybe my complaint is moot.
Just received this Hard Case for out Epson 2045 and ...
Leslie Humphrey•January 31, 2017
Just received this Hard Case for out Epson 2045 and had to do some serious customization to it. I found that it wouldn't fit perfectly until you cut and removed the foam on the bottom of the case. There are three pieces of foam the bottom is approx 1in thick then the middle is about 3 to 4inches the one on the top of the case with all the dimples is glued to the top of the case. So, what I ended up doing is cutting out the bottom part of the first layer to match the middle layer so the top layer didn't put to much pressure on the top of the projector and mess up the controls. I also trimmed the dimples on the top layer to give the back of the projector more room and so they again wouldn't mess up the controls.
So in summary this case WORKS, I wish it was about 1 1/2 to 2inches deeper, removing foam (protection) from the bottom of the case isn't idle but with the soft feet on the projector I hope will help protect it. I don't plan on throwing the case off a building or at a wall so I'm sure it will work. I'm keeping the foam I've removed to see if I can use it to help protect the bottom of the projector a little more.
If you buy this case then expect to customize it, take your time and just don't hack away at it.
Jason
So in summary this case WORKS, I wish it was about 1 1/2 to 2inches deeper, removing foam (protection) from the bottom of the case isn't idle but with the soft feet on the projector I hope will help protect it. I don't plan on throwing the case off a building or at a wall so I'm sure it will work. I'm keeping the foam I've removed to see if I can use it to help protect the bottom of the projector a little more.
If you buy this case then expect to customize it, take your time and just don't hack away at it.
Jason
... me Epson EX9200 Pro Wireless projector and it fits perfect. I obviously had to pull some of the ...
monstrcrakhed•January 8, 2017
i purchased this for me Epson EX9200 Pro Wireless projector and it fits perfect. I obviously had to pull some of the unneeded foam inserts out for the projector itself, the power cable, and the remote.
Page 1 of 2
