EVINIS 5Pcs Stainless Steel Spatula Palette Knife Painting Mixing Scraper Set,3D Print Removal Tool
Key features
- •Stainless steel blades with wood handles
- •Versatile 5-Piece palette knife set. Assorted shapes and styles for a variety of techniques
- •Primary use is to mix color; With wooden handles, light and easy to grab. Also excellent for thick paint applications
- •Painting knives oil color painting set are perfect for all types of paint mix media art supplies artist supplies palette for oil painting is safe to use with oil acrylic water paint. Five pallete knives painting knives set with different blade shapes and sizes.
- •An essential addition to your 3D Printer Tool Kit.Rounded edge is safer and less likely to tear print bed tape. Speeds removal of parts from print bed. Useful to pop prints off the bed, and to scrape off stuck-on plastic.
BrandEVINIS
CategoryPalette Knives
EVINIS 5Pcs Stainless Steel Spatula Palette Knife Painting Mixing Scraper Set,3D Print Removal Tool
List Price: $13.56$12.20DEALYou Save: $1.36 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It August 9, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
Works darn well.
kevin✓ Verified Purchase•September 27, 2023
These are the only ones that work for me. My bed adhesion is nearly unbreakable without using pliers, but the smallest spatula (#1) has been my go-to. I use PEI bed, and I haven't scratched it nearly as badly as I did with the ToyBuilder Labs spatula, which was too long and too flexible. Size #1 has held up due to its small size, so it doesn't bend easily.
Would recommend for those using a PEI, Kapton, Glass, or Tape bed.
Would recommend for those using a PEI, Kapton, Glass, or Tape bed.
good for 3D print removal from PEI
JDC✓ Verified Purchase•September 19, 2023
The two smallest sizes work really well for removing 3D prints from the PEI surface on a Prusa i3 mark 2.
As shipped the edges do have just a few rough spots which will scratch the print bed, though. Take some high grit sandpaper and lightly rub the flats on both sides near the tip 2-4 times to remove those rough spots.
Note these are way too thin for prying, but they're perfect to slide in between wherever the loosest part of a print and the print bed is and give it just a slight lift so it will pop free. But if you're prying you may well gouge your print bed regardless of the tool used.
We are not using the larger sizes at all yet -- they're too long to be stable when used as a wedge removing prints as above.
As shipped the edges do have just a few rough spots which will scratch the print bed, though. Take some high grit sandpaper and lightly rub the flats on both sides near the tip 2-4 times to remove those rough spots.
Note these are way too thin for prying, but they're perfect to slide in between wherever the loosest part of a print and the print bed is and give it just a slight lift so it will pop free. But if you're prying you may well gouge your print bed regardless of the tool used.
We are not using the larger sizes at all yet -- they're too long to be stable when used as a wedge removing prints as above.
Works great
Mary Roberts✓ Verified Purchase•September 9, 2023
Use with my 3D printer works great
Great for 3d printers and hold up to lots of use.
Campbell the Halo Fan✓ Verified Purchase•September 2, 2023
I was very hesitant to buy these after reading some poor reviews.
After using them I find that they are very well priced!
- They are perfect for scraping off models for my 3d printer.
- The handles hold up well and haven't had anything snap, break, or come loose.
- Nice variety for various models and use.
- There was no rust on any of them. (some reviews mentioned this)
WARNING: Do not use these to pry! I should not have to say this, but some people think they should hold up to prying up models for some reason. Metal this thin CANNOT do this, but they are fantastic for scraping underneath to help detach the model from the bed.
I cannot speak to how they are with painting, but for 3d printing, they work very well. I generally use ToyBuilder Labs spatula, but for this price of near 10 dollars, you are basically receiving 5 spatulas for the price of two ToyBuilder Labs spatulas.
After using them I find that they are very well priced!
- They are perfect for scraping off models for my 3d printer.
- The handles hold up well and haven't had anything snap, break, or come loose.
- Nice variety for various models and use.
- There was no rust on any of them. (some reviews mentioned this)
WARNING: Do not use these to pry! I should not have to say this, but some people think they should hold up to prying up models for some reason. Metal this thin CANNOT do this, but they are fantastic for scraping underneath to help detach the model from the bed.
I cannot speak to how they are with painting, but for 3d printing, they work very well. I generally use ToyBuilder Labs spatula, but for this price of near 10 dollars, you are basically receiving 5 spatulas for the price of two ToyBuilder Labs spatulas.
Great for use with polymer clay’s and liquid polymer clay
Barbara McGhee✓ Verified Purchase•August 27, 2023
I bought these to work with a combination of polymer clay and liquid polymer clay. They are strong and durable enough to do the tough work of mixing the two plays together. The clay does not overly stick to the metal ends. The edge has a great edge for using the mix clay to stencil the finished medium.
Page 1 of 2
