SpiritLED 100 Lots Strip Light Mounting Bracket,One Side Fixing,Screws Included (Ideal for Waterproof Strip Width 8mm(5/16"))
Key features
- •SPIRITLED NEW MOULD CLIPS. Waterproof Version,designed by SpiritLED. Hollow height (4mm)
- •WIDE APPLICATION.Suitable for SMD3528/3014/5050/5630 Waterproof Strip Lights' and Wires'( thicker than1/6") installation
- •SIMPLE INSTALLATION.100pcs Clips + 100pcs Screws in a lot. Easy to fix by one screw(included)
- •QUALITY & STIFF MATERIAL. Made of high flame retardant material NyLon66 UL 94V-0. Temperature resistance acheives 100degrees
- •ULTRA-THIN & NICE APPEARANCE.Safe and secure to hold strip lights,no damage on brightness
BrandSpiritLED
SizeIdeal for Waterproof Strip Width 8mm(5/16")
Colorcream-colored
Warranty1 year warranty Under the warranty period, if faulty parts appears after installation, please try to send us a picture or video by email. If the products are under normal use, replacement will be sent after confirmation.
SpiritLED 100 Lots Strip Light Mounting Bracket,One Side Fixing,Screws Included (Ideal for Waterproof Strip Width 8mm(5/16"))
List Price: $13.48$12.13DEALYou Save: $1.35 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.3
out of 5
Based on 10 reviews
5★
50%
4★
50%
3★
0%
2★
0%
1★
0%
Great Customer Service | Really Fun Lights!
Amazon Customer✓ Verified Purchase•July 15, 2023
Great customer service. I had very low expectations on receiving customer service when my 80ft string of LED lights burned out. First, I was sent a new power source. It promptly fried after I tried to plug it into the LED string. I reached back out and after a few emails to confirm I had the product in question, Lighting Ever sent whole new set that works great. I've been telling my friends about the experience and suggesting they buy from LE ... best prices and best customer service. Unheard of! Thanks LE!
My one issue is that, it's difficult to know if you have the spliced/cut strip setup correctly. The four-prong connector is not dummy proof and you have to be sure the prongs are installed straight and are making contact to the correct leads on the LED strip.
My one issue is that, it's difficult to know if you have the spliced/cut strip setup correctly. The four-prong connector is not dummy proof and you have to be sure the prongs are installed straight and are making contact to the correct leads on the LED strip.
a pain to install thx to non-magnetic screws
M✓ Verified Purchase•May 5, 2023
Pros: hold LED strips in place well.
Cons: non-ferrous screws make installing difficult.
I use magnetic drivers for small screws a lot, and was very disappointed that the screws for these are non-ferrous, so it meant installing each clip took three times longer since I had to carefully hold the screw in place (unable to actually see if was going in right at first) and since I was installing at the ceiling it meant a lot of dropped parts. It took at least 2 hours to install for a run of only 48 feet. Had they been magnetic it porbably would have taken less than an hour, (based on previous projects with similar factors and runs).
Once installed, they work well and secure the light strip well, just installation is a pain. I probably wouldn't buy these again. If I did, I'd toss the screws and go get ones that can be held magnetically. I still have a decent amount, and if I need them again, I'm definitely going to go buy a better box of screws
Cons: non-ferrous screws make installing difficult.
I use magnetic drivers for small screws a lot, and was very disappointed that the screws for these are non-ferrous, so it meant installing each clip took three times longer since I had to carefully hold the screw in place (unable to actually see if was going in right at first) and since I was installing at the ceiling it meant a lot of dropped parts. It took at least 2 hours to install for a run of only 48 feet. Had they been magnetic it porbably would have taken less than an hour, (based on previous projects with similar factors and runs).
Once installed, they work well and secure the light strip well, just installation is a pain. I probably wouldn't buy these again. If I did, I'd toss the screws and go get ones that can be held magnetically. I still have a decent amount, and if I need them again, I'm definitely going to go buy a better box of screws
Don’t over tighten
William W. ✓ Verified Purchase•April 26, 2023
Exactly as the description says but wish the plastic was a bit more ridged. You have to be careful to not over tighten, as the clip will deform rather easily. We ended up using 25 clips per 16'-4" strip of lights and have had no issues. Also found alternating directions when installing them helps keep the LED strip secure. Size is a little small to handle with larger fingers but when you have to use so many you don't want cumbersome clips taking away from the performance of the light strip either. Overall I'd buy these again unless another product, made more ridged and of the same size was offered elsewhere. We personally have close to 300 feet of LED strip lights installed with our application.
Nice Little Clips
shallowfish✓ Verified Purchase•April 22, 2023
Really like these clips except..."¦ Imagine putting these tiny little clips on the bottom an outdoor bench that doesn't move. Laying on your back working up above your head in a cramped space. These are not the correct application if you have this type of light installation. I needed something to hold the LED strip lights to an outdoor bench and thought these would be perfect. Well, they are for the most part. Maybe if you can get your partner with little hands to do the installation, all will be great but my hands/fingers are stubby and it's hard to hold the clip, insert screw, use the power driver to screw it in and move to the next. The good news is the little screws are stainless so outdoors won't matter, the bad news is they are LITTLE screws.....3/8" long and probably an 8 gauge or so. That said, they work well if you can get them in place.
The only way to attach SMD5050 strips
DuckFan✓ Verified Purchase•April 14, 2023
I have used 100's of these little guys on my SMD5050's and they are by far the best way to attach LED strips. Only issue I have is that the small size of the screws make it difficult to effectively use an electric driver, and if not careful the heads will strip. I end up pre-drilling my holes and screwing by hand and have not had any issues. I am installing under the edge of deck railings so the angle isn't the best for an electric driver anyway. Upgrade to magnetic screws is a plus. I install mine every 3 "cut-points", so about every six inches.
Page 1 of 2
