Premium 1/4 Clear Acrylic PlexiGlass Sheet
Key features
- •made from clear 1/4 inch thick acrylic
- •BENEFITS- Acrylic is stronger and lighter than glass, excellent resistance to long-term exposure of outdoor elements
- •MULTIPURPOSE- Acrylic sheet uses are glass window replacement, outdoor signs, lighting applications, and bending or manipulation.
- •EASY USE- Acrylic sheet can easily be sawed, routed, drilled, formed, bent and cemented
- •DURABLE SHIPPING- Our acrylic sheets arrive with Film Mask for Protection from stratches
Premium 1/4 Clear Acrylic PlexiGlass Sheet
List Price: $145.49$130.94DEALYou Save: $14.55 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
40%
4★
60%
3★
0%
2★
0%
1★
0%
Thick, crystal-clear sheet of plexiglass
🔹 Catrinka 🔹✓ Verified Purchase•October 30, 2023
I ordered this clear acrylic sheet to make a new, unscratched version of an Alberti's window or veil. This is a gridded, see-through tool that is used to capture proper angles and perspective when drawing or painting. While I had purchased my original Albertian Window from an art supply house many years ago, I decided to just use a medium-point black Sharpie on a plain piece of plexiglass for this do-it-yourself version.
The quality of this acrylic sheet is very nice. When you receive it, both sides are covered with a thin, protective vinyl film that easily peels off. This keeps the plexiglass surface from getting scratched until you're ready to use it.
My sheet of plexiglass was a smidgen over 1/4-inch thick and was not a full 12-inch square. It measures 11-7/8 inches on each side. The fact that it is not a full 12 inches was not an problem for my purposes; but I thought I would mention it in case someone is building a display case and needs an exact measure.
The quality of this acrylic sheet is very nice. When you receive it, both sides are covered with a thin, protective vinyl film that easily peels off. This keeps the plexiglass surface from getting scratched until you're ready to use it.
My sheet of plexiglass was a smidgen over 1/4-inch thick and was not a full 12-inch square. It measures 11-7/8 inches on each side. The fact that it is not a full 12 inches was not an problem for my purposes; but I thought I would mention it in case someone is building a display case and needs an exact measure.
Good for router base plates, but I wish it were actually .250" thick
Joe V✓ Verified Purchase•September 29, 2023
My sheet measured .218, or 7/32", not the advertised 1/4". Close enough for most work, perhaps, but I still wish it were the full .250.
I purchased this to make baseplates for my Dewalt laminate trimmer, using the same mounting geometry as the original factory plate, but in a variety of shapes and sizes. The original measures a full .250" thick, and mounts to the router with panhead machine screws, set flush to the plate in 1/8" deep, oversize diameter counterbores that allow for slight centering adjustment. That leaves a full 1/8" of material underneath the screw head, to hold the plate on the router body.
With 1/32" less material, I didn't want to counterbore quite as deeply. I ended up splitting the difference, and grinding 1/64" off the heads of the machine screws. Will it be strong enough? Time will tell. But is it ideal? No.
The material itself machined nicely, with no cracking, even when using a 1/2" Forstner bit. The edges I bandsawed cleaned up easily with a bit of 220 paper.
What I expect is the same material, in the same size, is available at Rockler for 1.5x the cost. But I wonder if it is full thickness...
I purchased this to make baseplates for my Dewalt laminate trimmer, using the same mounting geometry as the original factory plate, but in a variety of shapes and sizes. The original measures a full .250" thick, and mounts to the router with panhead machine screws, set flush to the plate in 1/8" deep, oversize diameter counterbores that allow for slight centering adjustment. That leaves a full 1/8" of material underneath the screw head, to hold the plate on the router body.
With 1/32" less material, I didn't want to counterbore quite as deeply. I ended up splitting the difference, and grinding 1/64" off the heads of the machine screws. Will it be strong enough? Time will tell. But is it ideal? No.
The material itself machined nicely, with no cracking, even when using a 1/2" Forstner bit. The edges I bandsawed cleaned up easily with a bit of 220 paper.
What I expect is the same material, in the same size, is available at Rockler for 1.5x the cost. But I wonder if it is full thickness...
Great product ar at great price
Amazon Customer✓ Verified Purchase•September 25, 2023
Can't believe the others are priced so high.
Fine product
Ross✓ Verified Purchase•September 24, 2023
Timely delivery--exactly as advertised
Perfect
Gumbo✓ Verified Purchase•August 30, 2023
Shipped quick, just as discribed.
Page 1 of 2
