Project Patio 1-1/2" Wrought Iron Patio Furniture Feet Glides and Outdoor Chair Leg Floor Protectors - End Cap Inserts - Deluxe (16 Pack - Black)
Key features
- •1-1/2" WROUGHT IRON PATIO CHAIR GLIDE installs INSIDE the metal cup on the bottom of the chair or table feet of wrought iron patio furniture with a inside diameter of 1-1/2" Make sure you measure the inner diameter of the wrought iron cup area where the glide will be installed. Measure before ordering. The most common size is 1.5" inches
- •HEAVY DUTY non-scratching replacement outdoor chair and table foot caps are thicker and easier to install versus the non deluxe standard version. Perfect alternative to the Forever Glides
- •PROTECTS your patio surface and your patio furniture feet from damage.
- •PROVIDES smoother movement of furniture. Patio chair slides over the floor
- •PACKAGE INCLUDES 16 furniture cap replacement pieces. The Project Patio brand is sold exclusively by Jekm Brands Inc. BEWARE of imitations of lesser quality from other suppliers. We offer a 30 day 100% satisfaction guarantee or your full money back
Project Patio 1-1/2" Wrought Iron Patio Furniture Feet Glides and Outdoor Chair Leg Floor Protectors - End Cap Inserts - Deluxe (16 Pack - Black)
List Price: $32.18$28.96DEALYou Save: $3.22 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.8
out of 5
Based on 10 reviews
5★
80%
4★
10%
3★
0%
2★
10%
1★
0%
I just can't get them on the chairs......
Karen M✓ Verified Purchase•November 1, 2017
Having a terrible time putting them on the legs of my chairs. Even a hammer won't work. Bought the 1 1/4 size and they just fell off, too little. So I bought these. No matter how I measured the inside of the leg it still didn't come out right. Wish they made a 1 3/8 size. This is so frustrating. However I will say they are well made and sturdy. Will keep legs from leaving rust marks on deck or patio.
Didn't work for my chairs
review✓ Verified Purchase•October 31, 2017
With a calipers, I measured my wrought iron chair's metal cup openings at 1.47" so I thought these 1.5" slides should work. But I was wrong. It was impossible to get these glides on. I even tried softening them in hot water and that didn't help. I ended up cutting (4) small equidistant slots into the sides of these glides which finally allowed me to get these on. So I would recommend that you make sure you cup's opening is greater than 1.47" otherwise you may struggle like I did.
Very happy with these
Theresa✓ Verified Purchase•September 16, 2017
I was a bit apprehensive after reading the reviews about these not fitting but I shouldn't have been. These popped into place with a rubber mallet with no trouble. I didn't have to do anything else but follow the manufacturers directions for a perfect fit. Very happy and the shipping was super fast along with great communication after the sale. I would buy from this company again.
Worked. Beautifully!
Jeri✓ Verified Purchase•August 23, 2017
These deluxe chair glides worked beautifully! The day was a little bit warm, so they were softened. This helped the installation tremendously. Other than the legs that were completely rusted out, these went in very easily. I used a screwdriver to remove the debris, and then 1 to 3 whacks with a soft mallet, and they were securely installed.
For the rusted out legs, I used pliers to straighten out the chair feet as best I could, and added quite a lot of outdoor adhesive to help secure them.
For the rusted out legs, I used pliers to straighten out the chair feet as best I could, and added quite a lot of outdoor adhesive to help secure them.
good product
L. Amick✓ Verified Purchase•August 8, 2017
We needed these to replace worn out and missing pads on our patio furniture. Keeps the deck free of dings and dents from the metal feet penetrating the wood.
Although they do fit snuggly when gently hammered in with a mallet, we went ahead and used an indoor outdoor adhesive to secure them as the replacements we purchased last year came loose over time. Probably due to temperature fluctuations and stress on them.
Although they do fit snuggly when gently hammered in with a mallet, we went ahead and used an indoor outdoor adhesive to secure them as the replacements we purchased last year came loose over time. Probably due to temperature fluctuations and stress on them.
Page 1 of 2
