2 Pack - Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
Key features
- •Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connector assembly. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low water pressure flow, and prevent dirt backflow all with a single pre-assembled unit.
- •Connect ½" tubing to any standard ¾" male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.
- •Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.
- •Don't settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.
- •Save money and time buying everything you need at once. Jumpstart your drip irrigation installation with this essential set of components for building a maintenance-free drip system. Ideal for use with raised garden beds, residential, farm and agricultural watering applications.
BrandHabitech
CategoryDrip Irrigation Kits
2 Pack - Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
List Price: $60.15$54.14DEALYou Save: $6.01 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
It works it lasts
Ken✓ Verified Purchase•November 7, 2023
After having one for a year and using it for a couple of seasons, I would say that it works pretty well. So much so that I purchased another one for my front yard.
Easy to install and no leaks!
Sandra King✓ Verified Purchase•November 3, 2023
I purchased this for a drip irrigation system in my garden. This fit snugly on the line and there are no drips or leaks. Highly recommend!
Better than Rain Bird
Hasan K.✓ Verified Purchase•October 19, 2023
These are great. I bought the rain bird setup previously and it leaked. This works flawlessly and fits my rain bird 1/2 tube without any issues.
Great pressure regulator
Rad Reviews✓ Verified Purchase•October 14, 2023
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options.
I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings.
From what I read, these drip systems operate best at 20-25 PSI. So I got this regulator because the pressure coming out of the outside spigot is between 30-40 PSI.
+ Good price.
+ Very easy to use. This allowed me to connect my 1/2 in drip irrigation tubing to my water hose... which terminates at my water spigot.
+ Very happy with the performance so far. I even tested this device with my B-Hyve timer. The second shot show 1.83 gallons per minute during watering. 2 gallons per minute is about 20-25 PSI. So I see that this regulator is doing its job.
- Nothing thus far.
I am very happy with the performance of this regulator, it is doing its job. Ill update this review as necessary.
I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings.
From what I read, these drip systems operate best at 20-25 PSI. So I got this regulator because the pressure coming out of the outside spigot is between 30-40 PSI.
+ Good price.
+ Very easy to use. This allowed me to connect my 1/2 in drip irrigation tubing to my water hose... which terminates at my water spigot.
+ Very happy with the performance so far. I even tested this device with my B-Hyve timer. The second shot show 1.83 gallons per minute during watering. 2 gallons per minute is about 20-25 PSI. So I see that this regulator is doing its job.
- Nothing thus far.
I am very happy with the performance of this regulator, it is doing its job. Ill update this review as necessary.
Works great!
Adam Crusher✓ Verified Purchase•October 14, 2023
We've changed our veggie garden over to drip irrigation this year and this has worked great so far. I was worried at first why it "leaked" after the water was just shut off, but I now understand that this is just releasing the back pressure from the garden lines. This is a great value, as these individually would be way more. I would recommend these.
Page 1 of 2
