upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05(not Support 3080 ti)
Key features
- •Adjustable for different video card weights and sizes. Lifetime warranty
- •Low-key matt black aesthetic that improves the look of your PC
- •Prevents sagging and removes stress on motherboard.
- •Doesn't restrict airflow yet maintains rigid structure.
- •Adaptable to a wide range of motherboards and cases.
upHere Graphics Card GPU Brace Support Video Card Sag Holder/Holster Bracket, Anodized Aerospace Aluminum, Single or Dual Slot Cards (Black),GL05(not Support 3080 ti)
List Price: $15.50$13.95DEALYou Save: $1.55 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
50%
4★
30%
3★
0%
2★
10%
1★
10%
Does what it is supposed to.
AD✓ Verified Purchase•September 11, 2018
Using this on an HIS 7870. If you are familiar with that graphic cards you know it's a weighty beast.
Card has always sagged a bit but had gotten a lot worse recently.
This has been installed for a couple of weeks and card is sitting perfectly now with zero sag.
Installation isn't hard but if you have two people it's a lot easier. Advice, if you are doing this alone turn the tower on it's side (if possible) and install.
Only complaint is that the screws seemed slightly too large and did not want to feed into the holes. I eventually just threaded the screw by itself then put the bracket on. I am guessing it is the coating on the screw causing the issue.
Card has always sagged a bit but had gotten a lot worse recently.
This has been installed for a couple of weeks and card is sitting perfectly now with zero sag.
Installation isn't hard but if you have two people it's a lot easier. Advice, if you are doing this alone turn the tower on it's side (if possible) and install.
Only complaint is that the screws seemed slightly too large and did not want to feed into the holes. I eventually just threaded the screw by itself then put the bracket on. I am guessing it is the coating on the screw causing the issue.
Dont buy for thin GPU's, GPU's w/ Waterblocks, or mATX cases
Ross Dineen✓ Verified Purchase•July 15, 2018
This product was developed by a person who saw a need, but didn't want to do research. I'm Sure this is perfectly suitable for some people, but there are some huge flaws. For starters the product is aluminum, there is no need to have 3 PCIe slots. None what so ever. With the said PCIe slots. Speaking of the PCIe slots, theyre thick, and no indented at all, so actually getting the screw into place is far more difficult than it should but. The screws are also garbage. The ends are perfectly flat, so getting it to thread is almost impossible. Specially on a mATX case where there isnt any room to spare. They just lip and slide through the grove in the bracket. 5 times screws popped out cause they couldnt be guided. 1 of said screws got trapped between my GPU and its back plate. Even for 10 bucks this thing is trash. Specially since I got charged $8 for shipping.
Might be great if it fits in your brackets.
Jay Phillips✓ Verified Purchase•June 20, 2018
This didn't fit into the my gpu brackets properly and didn't feel like it would have offered any more stability than the stack of Lego I am currently using to support my card. Shame that this didn't work as it was well-priced, looked good, and seemed to be solidly constructed.
Worked better than expected. No sag and no PCB warp.
HuskyD✓ Verified Purchase•June 2, 2018
I had little expectations on this product, but it thankfully it worked great. I was skeptical because I have a very large GPU and I was almost 100% it would hit the fans, but luckily it did not. The rubber mounts are just barely resting on the fan shroud, about a few millimeters from not touching the card or touching the fans.
Although I felt like it wouldn't hold the weight of the card, it pretty much eliminated the sag and even got rid almost entirely of the PCB warp. I am very happy. It kind of kills the aesthetics, but I got a black one and you can barely see it.
I have an MSi GTX 1080Ti on a Corsair crystal 460x case. See pictures attached for reference. I hope it helps you decide if this product will work for you or not.
Although I felt like it wouldn't hold the weight of the card, it pretty much eliminated the sag and even got rid almost entirely of the PCB warp. I am very happy. It kind of kills the aesthetics, but I got a black one and you can barely see it.
I have an MSi GTX 1080Ti on a Corsair crystal 460x case. See pictures attached for reference. I hope it helps you decide if this product will work for you or not.
a must for heavy gpu s
RJC✓ Verified Purchase•April 30, 2018
excellent product at an excellent price. Works perfectly, took about 5 mins to install. MSI gtx 1060 no backplate sagging almost upon install. No directions included but easy to figure out, must use included screws case thumbscrews not long enough. Just move the rubber pads to a solid part of your card and it will be solid as a rock. My only complaint is the product badging "uphere" in bright white, because my system is all black. I am going to paint and reinstall.
Page 1 of 2
