EasyJig 128 Template Jig for easy installation of Kitchen Cabinet Pulls Handles knobs for Doors and Drawers
Key features
- •New, improved and affordable. SuperEasy-Jig 128. Set it up once and use it repeatedly with no further measurements - This template jig lets you measure out perfect hole positions for cabinet handles, pulls, and knobs. Included Brad point drill bit allows you to make perfect holes
- •Quick, Easy Adjustments - A multiple purpose template for precise installation of Pulls/Knobs on drawers and doors, the L-bracket and top screws keep it dialed in horizontally and the two large front thumbscrews locks in the vertical position.
- •Each Template comes with multiple pairs of standard hole sizes from 2 1/2 inches (64 mm) to 5 inches (128 mm). SuperEasyJig allows for perfect centering of holes for drawers and perfect alignments for doors.
- •Premium Durability - Crafted with stainless steel and Aluminum, our jig is strong enough for even contractors to use it thousands of times.
- •SuperEasy-Jig 128 Drawer and Cabinet Jig
- •Quick Adjustment and Locking Screws
- •Easy to Read Measurements
- •Coated Aluminum Craftsmanship
- •DIY Friendly
- •Long-Lasting Durability
EasyJig 128 Template Jig for easy installation of Kitchen Cabinet Pulls Handles knobs for Doors and Drawers
List Price: $30.94$27.85DEALYou Save: $3.09 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers2.9
out of 5
Based on 10 reviews
5★
30%
4★
20%
3★
10%
2★
10%
1★
30%
This jig is only useful for shallow drawers and doors
Amazon Customer•May 19, 2018
This jig is only useful for shallow drawers and doors. I needed it for 10" deep drawer faces and it does not work for them. I will only measure 9 or 9 1/2 drawer faces and that might be a stretch. Make sure you realize that it is only a template for marking holes and not a drilling jig. The quality of construction leaves a bit to be desired as well The block that attaches to the clamp that holds the jig in position was loose and could not be tightened to remove a wiggle. Changing the screws and or the hole size of the countersink would make it work. I returned it without an issue. Thanks Amazon.
Easy to use
Margie•March 2, 2018
The best part about the jig is that it's easy to use and provides consistent results.
Things that could use improvement: the rail could be beefed up and the jig is not made for larger drawers. The rail was slotted very tight so when tightening the adjustment screws it wants to bow and bend not giving you the tight fit.
I give this 4 stars because it provides consistent results, is easy to use, very inexpensive and can be used over and over.
Things that could use improvement: the rail could be beefed up and the jig is not made for larger drawers. The rail was slotted very tight so when tightening the adjustment screws it wants to bow and bend not giving you the tight fit.
I give this 4 stars because it provides consistent results, is easy to use, very inexpensive and can be used over and over.
Works very well!
B. Webb•February 21, 2018
I don't understand the negative reviews. I used this for over 20 drawers and cabinet handles, and it works great. It takes a bit of effort to get it setup. It doesn't self center, and you have to make sure the place is square, but once it's setup it works very well and is very efficient to use.
The one suggestion that I have is it would be nice to have some marks on the side of the plate that could be used to ensure that the plate is square.
The one suggestion that I have is it would be nice to have some marks on the side of the plate that could be used to ensure that the plate is square.
The tolerances in the guide are horrible. Doesn't tell you full height capability
Christina A Ross•February 17, 2018
The tolerances in the guide are horrible. Doesn't tell you full height capability; 10" deep drawers are no match for this jig. The clamp is nothing more than a bolt that digs in the back of the drawer. No felt included to prevent damaging painted cabinets! Oh and the best part is the hex bolts that are on the registration surface aren't even flush so the whole guide surface rocks on the 2 bolt heads. Haven't found a perfect guide yet but this isn't it. Quality materials used but poor thought and design make this one to stay away from.
Absolute dud
Ashlyn Carter•February 17, 2018
This is far and away the worst purchase I've ever made on Amazon. Center line is off center, jig is loose fitting and doesn't stay parallel to the drawer/cabinet face, and the tension screw on the particular one I received was put in at about a 75° angle. It came with instructions that were printed on 8.5x11 paper and stapled together like a term paper. Don't waste your time or money
Page 1 of 2
