I wish you guys would make more I am going to buy one Friday but its probably going to be out of stock?

Easy markings. Easy directions. Plus videos on line. Installed this rod on 212. High compression piston, stage 2 , 265 cam, head ported and polished, shaved 40,000s off head, 28mm Carb, torque converter, thing lives at 7,500 rpm all day.

Works great..perfect fit..installed on gokart and bike i built..predator212cc hemi ..22lb valve springs, ported head,billet flywheel, rod,mod2 race cam,vm22 mikuni carb..bike goes over 50mph before my nerves left me..lol

Works great in a stock engine definitely recommend you would pick up a tiny torque wrench when you torque the sucker down the instructions kind of make sense good luck when trying to interpret it just first seat the bearings by twerking them to a crankshaft make sure you use oil on the bearings and make sure you use oil on the bolts otherwise the bolts will just just break on you and you will not be a happy camper so put oil on the threads of the bolts then torque them in 20 lb increments climbing all the way up to 175 and it's okay if you exceed that it just walk them back and forth and when it's torqued down and all happy and all fine undo what you just did and redo it inside the engine with the rods and everything and you will be surprised on how amazing the actual connecting rod and everything with the quality just as it will work fantastic you'll wonder why you haven't done it sooner

Beautiful!