Very well packed. Some slight shipping damage but easy to restore functionality. Straight forward assembly. Most difficult part of assembly was putting doors on as the spring loaded pin slipped out of hole.

I bought this on sale for $107 and at that price, it's a killer deal! It blew far past my expectations. Mine didnt come with a manual so I had to watch a video on YouTube, but overall it's very sturdy and wasn't much of a hassle to put together. I'd totally recommend this!

Recently purchased this cabinet because it was on sale. Unfortunately, the package came with a damage door, I didn't notice it until I was done putting it together. The damage has caused the door to be difficult to lock. Was able to get a hold of the seller, initially, they were willing to compensate me with a $50 credit, but I didn't want it. Instead, I ask if they can ship me a door so I could just replace the damaged one. We were able to work things out and so far I can't complain with it. Now, our garage looks a bit organize and stylish at the same time.

The product is great if you buy it on sale. It's not worth more than $200 and you have to add magnets to keep the doors from swinging open with the slightest sneeze.

While overall I'm happy with this cabinet, there were a few issues. It is pretty heavy, so have someone around to help you take delivery and get it in your house unless you have a good moving dolly available. Although heavy, the cabinet scratches and bends VERY easily - see photos. The scratch was already there when we opened the box, as was a dent on the door. There was also some bending on two shelves, although it didn't effect them as it was the back tabs and not the top of the shelf itself. Everything seemed to be packed and shipped really well, and the box was in fine shape, so I was surprised to find the dents and dings. However, as I was putting this together I discovered that it wouldn't take much to dent or bend the shelves or individual panels of this cabinet. Assembled it's fairly sturdy, but the individual parts can be easily damaged.

There was also a part in the instructions for installing the bottom section that said two screws on each side on tabs, and showed a picture of the tabs with two holes in them - But there was only 1 hole drilled on each side and there was no hole behind the tab for a screw to attach to anyways, so I just ignored it and left it with 1 screw on each side. It didn't seem to make anything loose or unstable.

The last minor complaint I have is the door hinge installation. It's easy, but there is what I would consider a lack of design or engineering on the door hinge at the top. To install the door, you put the bottom hole of the door on a hinge peg, easy enough. But at the top, there is a little spring loaded hinge with a 'J' hook that you grab to lower and then put the top of the door in place and release the spring loaded hinge so it slides into the hole at the top of the cabinet. However, when you pull on the 'J' hook you have to be VERY careful as it will pull all the way down, out of the hole at the top of the door, and swing around so that the peg won't go back up through the door itself. There should be a guide or limiter built on the inside so this won't happen. Took some playing around with needle nose pliers grabbing the 'J' hook and twisting to get the peg back up through the hole. After this happening twice on the left door, I finally just used my finger to push the peg down and slide it in at the top and opened the door until the peg sprung into the top of the frame and everything was fine. Minor, but annoying and a waste of about 10 minutes of my time.

Overall though, for three hundred bucks it's not the worst cabinet I've purchased and I think it's a decent value. I was planning on using it to store a lot of ammo cans on the various shelves, but I'm not confident enough in the higher up shelves to do that, so I'll probably just put the first shelf on the bottom higher and stack them down there and put lighter items on the upper shelves. The brackets and adjustable feet at the bottom are nice, especially when you have a 120 year old house like we do.

As far as putting it together, it's not all that complicated but if you have someone there to help you it will make it easier. You do have to put this down on its side and back in order to install some of the components. It's mostly just screwing the panels together, so again it's not that difficult other than having to maneuver it around to get to tall the screw locations necessary for assembly.