I'm giving this product 5 stars. If you don't know how to tint windows, don't buy this tint and then give it a bad review because you didn't know what you were doing. I bought it because I have experience tinting.

That being said, to the people who know how, this is nice tint, does as expected and for a guy that hasn't tinted a window in about 25 years it was very forgiving. You know the deal, the wetter the better!! I kept it sprayed down and it moved for me with palm taps when needed and responded well to the heat gun, I even had to pull a piece after I had squeegied it out and it laid back down and acted right. (Had a piece of trash that was buggin the piss outta me)

The cuts were good but I still had to do a little trimming. I didn't have a glass rack so I razor scraped the outside to check and trimmed what I needed. Asked for a limo eyebrow and they sent me the whole windshield lol.

In short, nothing to fear with this product, well packaged, no damage upon arrival, I'd recommend it or purchase again if I was looking to do another rig.

The film is 2mil thick and the quality is somewhat you can compare it to 3m products. First ceramic tint so let's see how it turns out for long run. Sadly, my order seemed to be confused with another one. I am currently waiting for the sellers to respond. So far great customer service over the weekend.

*FYI, this is something I did not know, so depending on if you want absolute clarity, ceramic tint may not be for you.*
Low Angle Haze(LAH) is the condition that afflicts many high heat rejection "ceramic" window films. When the sun is at a low angle in the sky, this foggy appearance is most pronounced. The higher the IR rejection (Infra-red rejection), the higher the LAH.
*********************************************

Packaged very well and all the cuts look like they will line up with enough overlap to allow for shrinking. I did have one issue with the back windshield though.

I just took it to the installer and he noticed the the third brake light was cutout and I dont have one. I just contacted the vendor for a resolution. My rating will go up or down based on their response, and what the installer says about the tint.

*Update 1* The seller is sending me a replacement back window. Changed the rating to 5 stars. My installer said it went on relatively easy and his only comment was that it was a thick film. I live in Arizona, so I wasn't expecting any miracle change with this tint, but it is noticeably cooler inside the car, and the AC works more efficiently because of the tint. Of note: the front windshield at 70% has a slight haze to it depending on the angle of the sun. It's not horrible, but figured I would mention it here.

*Update 2* The back windshield is installed and the low angle haze is very noticeable here too. All windows have it. It's a minor annoyance that is a common problem with all ceramic window tints. Ultimately, the higher IR and heat rejection are worth the haze, as it only happens in certain light conditions, and never at night. I'll add photos later.

Have a professional install it. It will be worth the extra money not to get a headache! I wasted the front and rear windshield pieces.

Best tint value, i will buy it again for next daily driven vehicle i get.
It does block some of the sun's heat, a noticeable amount, but it seems to heat the glass up much more in doing so which can have interesting side effects.
Harder to install than gila tints, easier than solargard supreme to get decent result; doesn't heat gun to shape very well and is difficult to cut (the windshield piece) thus resulting in visible creases and defects, even installed by professional tinter. It has a tendency to lift fingers after completion, they should include a long squeegee block with it.