BTA-MALL
Cart
Account
CategoriesOrder TrackingShipping PolicyAbout Us

Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling

Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling

Key features

  • •MATERIAL - Tungsten Carbide, high hardness and good toughness, machining hardness reach to HRC70.
  • •BOUBLE CUT HEAD DESIGN - Rotary files have more cutting edges and will remove material much faster and leave a smoother finish than single cut due to producing smaller chips as they cut away the material.
  • •SIZE - Shaft -1/4 inch(6mm);Outer diameter of the tip - 2/5 inch(10mm); Total length 58 - 65mm, Suit for (6mm) 1/4 Inch electric die grinder.
  • •CUTTING BURR SHAPE - Ball, Pointed Tree, Round Nose, Cylinder with End Cut, Cylinder with Round Head.
  • •TUNGSTEN CARBIDE BURRS - Rotary tool bits used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring).
BrandCBTONE
CategoryPower & Handtools
Size1/4 Shank
Color6x10mm

Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling

List Price: $34.90$31.41DEALYou Save: $3.49 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection

Customer Reviews

Reviews sourced from verified Amazon purchasers
4.5
out of 5
Based on 10 reviews
5★
70%
4★
30%
3★
0%
2★
0%
1★
0%
Very sharp cutter
Amazon Customer✓ Verified Purchase•July 31, 2023
Grinds brass with ease
Good selection
Decent quality.
Warren P Nash✓ Verified Purchase•July 13, 2023
The burr set is not garbage. It is too easy to buy total overseas junk. I was pleased when I found out that these burr's will go in the tool box for future projects.
Shanks are smaller than 1/4".
Amazon Customer✓ Verified Purchase•July 3, 2023
Bits cut okay in electric drill. Would not tighten in 1/4" collet of other tool.
Good for my uses
guyinsandiego✓ Verified Purchase•June 21, 2023
These seem good for what I use them for which is removing burrs on drilled holes. I actually just spin these using my fingers and they get the job done but I do very fine work. No idea how they would last as an actual drill bit.
Good value for the money!
Peter Angert✓ Verified Purchase•May 12, 2023
These are a good buy for the money, but they are not as heavy or as sharp as true carbide bits I have used in the past! Worked perfectly for the job I used them for!
Page 1 of 2