DEYUE 40PCs PCB Board Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects
Key features
- •100 % SATISFACTION GUARANTED ★ Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering; 0.1" hole spacing for DIP integrated circuits and headers.
- •THIS IS NOT YOUR NORMAL PERF BOARD! ★ This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions
- •MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use; With pre-tinned plated holes; Double sided board with plated-thru holes allows components to be easily soldered to either side of the board
- •THE FLEXIBILITY OF HAVING CHOICES ★ Great assortment with variety of size and perfect for quickly prototyping stackable circuits
- •PACKAGE COMPONENT ★ 40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs; 4x6 and 5x7 each 8 Pcs; 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner
DEYUE 40PCs PCB Board Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects
List Price: $21.32$19.19DEALYou Save: $2.13 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.7
out of 5
Based on 10 reviews
5★
70%
4★
30%
3★
0%
2★
0%
1★
0%
Nice solid basic prototyping boards in a variety of sizes.
Martha W Kellner✓ Verified Purchase•September 12, 2023
They are what they say they are. I've prototyped items for a few Arduino projects on these, and also to hold relays in a high voltage power supply (the circuit board were in the low voltage control area). Easy to solder onto, there's no issue with trace adhesion to the boards, the metal is firmly attached. Soldering has been easy as expected. All boards were clean and ready to use upon arrival. Packaging was tight and minimal, something I appreciate -- minimum waste for this product's packaging, but still appropriately solid cardboard box.
Good boards
TechGReviews✓ Verified Purchase•September 10, 2023
I've used almost all of the ones in the box and I really like these prototyping boards I haven't pulled any pads off and I've resoldered to them a few times with no issue.
The M3 sized holes came in handy for stacking boards with standoffs and they're very sturdy!
The M3 sized holes came in handy for stacking boards with standoffs and they're very sturdy!
Not particularly easy to connect holes
Dave✓ Verified Purchase•August 30, 2023
I had to dump a lot of solder on the holes to get them to connect with each other. Not the worst thing in the world but something to be mindful of.
Great Value
Aden✓ Verified Purchase•August 15, 2023
What is there to say really, it's protoboard and a lot of it for a good price.
Very usable, typical of other in this category.
PhotoRoto✓ Verified Purchase•August 11, 2023
The plating on these is a little thin, nothing new there for boards of this type at this price level. All pads on the 10 or so I looked at were at least adequately plated for easy soldering, and all the drilled holes were accurately centered. Would buy again.
As with all boards of this type, it's best give them a brushing with stainless steel wool before starting a project to remove oxidation and solder-resistant stuff that may have accumulated. Many of boards in the pack were connected to each other with tape for easy packaging. There was a small amount of tape stickum stuck to a few of the pads on some board that was easily removed that way.
As with all boards of this type, it's best give them a brushing with stainless steel wool before starting a project to remove oxidation and solder-resistant stuff that may have accumulated. Many of boards in the pack were connected to each other with tape for easy packaging. There was a small amount of tape stickum stuck to a few of the pads on some board that was easily removed that way.
Page 1 of 2
