Product works on some dents but may not be adequate for smaller indentations. Make sure to let the glue get as hot as possible or it will not adhere to the car. Also be sure to properly clean the surface and wipe down with rubbing alcohol before applying the hot glue and pulling piece. Have plenty of rubbing alcohol and a rag available as it can be difficult to remove the piece from the car after pulling and be careful because I did manage to pull a few tiny chips of paint off with the glue when removing it. Cleaning the pulling pieces is also easier if you let them soak in a little bowl of rubbing alcohol. You can then pull most of the glue off the pulling piece easier. If one size or shape pulling tab doesn't work as well as desired, try another one. Some are rounded and some are flat which affects how it adheres to the panel. I preferred to use the puller without the slide hammer. Using the slide just pulled the glue and tab off the panel while using it with the handle alone worked better. I didn't get the results I was hoping for but the panels definitely look better than before so I'm happy with the purchase. If you can afford a larger kit with multiple different pulling devices and tabs, I would recommend purchasing one of those. Having the different size and shape pulling tabs does make a difference and the different pulling devices may work better for different dents or in specific locations. I am considering buying the two other pulling devices to see if they work better than the slide and puller.

After using my dent lifter for years I realized I would need a slide hammer puller to get some of the harder deeper dents to lift easier without so many attempts at glue pulling with my hand lifter. You get can some real power to lift deeper dents or body line dents with this kit in places where my hand lifter just couldn't go. I love my hand lifter but now that iv'e added this kit to my dent tool collection I feel there isn't any dent that I can't pull. This dent pulling stuff takes practice to get perfect results so make sure you try to practice a bit on an old car or something to get a feel for it. This kit is very complete if your looking for a slide hammer, I also love the small mallet and knock down tool with all the different tips. Really nice kit and a must have in order to keep your car or trucks body in tip top shape. I am super picky about any imperfections in my trucks body and paint. I don't go out looking to get dings or dents but I now know that I have some skills and the right tools to get the job done correctly without making things worse. Practice, Practice, Practice! I've even started making some money on the side using pieces from this kit to remove dents but this does take patients and practice before people start throwing money at you to repair body damage.

Positives
- This surprised me that it actually works pretty well at least for making large or medium dents smaller
- Easy to use using the glue gun
- Dents definitely get better

Negatives
- My package was missing the blue suctions which sucks since I needed them thus -1 Star
- While it reduces the dents, it didn't work well on the smaller dents. I think the slide hammer may not work as well on smaller dents (or I didn't do it right)
- there basically was no instructions so I had to search on YouTube
- I have no clue how to use the hammer and tap downs which is probably what would take the smaller dents out

Tips
- Be careful since the hot glue can obviously burn you. It is easy to do on the small suctions
- Start from the edges and move toward the middle
- wait a few minutes for the glue to adhere since it pops off easily
- it doesn't come with isopropyl alcohol so don't forget to buy some ahead of time to take off the glue
- watch YouTube videos on PDR ahead of time

These tools have been used many times, and are well made for the cost. I have broken several of the plastic parts after heavy use. I feel like the amount of abuse I put them through was expected that some wear would be experienced. The number of spare dent cups provided is totally reasonable. I thought the glue sticks were of great composition compared with similar products. Very happy with this and would buy again.

I bought this product to repair a dent in the corner of my bumper. I don't have Prime so it took a long time to receive the product. When it finally arrived I was excited to try and repair the dent. When I first tried it, it didn't work very well. The bond between the glue and the car wasn't strong enough so when I tried to pull the dent off the glue would separate from the car. I tried cleaning the car again to see if I could create a better bond. I also used a hair dryer to heat the surface of the car immediately before applying the piece used to pull out the dent. I also twisted the piece very slightly as I pushed the piece to the car to make sure there was a good bond. to my surprise I was able to pull the dent out.

One recommendation, if you have a larger dent like I did, see if you can pull out the middle of the dent first. When I tried pulling it out from the edge and work my way to the center of the dent it would pull out but by the time I would set it up to pull the next part out, the dent would go back in. When I pulled more of the middle of the dent out, most of the dent popped right out.