Geloo Ignition Switch Panel 12V Racing Car Engine Start Push Button Switch Panel Carbon Fiber LED Toggle Switches for Race Car RV Truck 5 in 1
Key features
- •DC 12V Ignition Switch Panel 5 in 1 Car Engine Start Push Button LED Toggle For Racing Car
- •1 ON-OFF red toggle switch; 1 x red engine start button + 3 x toggle switches for additional use; Come with the relay to control the buttons of this item .
- •Red LED toggle switch with Black aircraft style cover. Can shut off the power of the whole vehicle in an instant.
- •Material: Aluminum Alloy and Plastic;Current & voltage: 30A & 12V .
- •Pre-drilled mounting holes.---Our driving lives are no longer boring, but full of unlimited fun. Ideal for any speeding & racing vehicles: car or boat etc.
Geloo Ignition Switch Panel 12V Racing Car Engine Start Push Button Switch Panel Carbon Fiber LED Toggle Switches for Race Car RV Truck 5 in 1
List Price: $35.95$32.36DEALYou Save: $3.59 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
40%
4★
60%
3★
0%
2★
0%
1★
0%
What a fun addition to your vehicle
Erin Brumage✓ Verified Purchase•August 30, 2023
Be advised that there's no wiring diagram for this switch panel. But there are videos on YouTube that are helpful. What I discovered is that my system on my '73 Jeep CJ5 only has 4 wires, so the third switch isn't used for ignition. Second, I discovered that there is a wire to activate the coil which has to be live before the button can be used to start the engine. The button may activate the starter, but the engine won't start without the coil. Lastly, the final wire (of my four) was for all the other accessories. This is main point of divergence in most ignition systems on newer cars. This single wire activates my "accessories" which, on my Jeep, are only comprised of gauges. So, watch the videos, and dive in and give it a try. It's a cool way to start your vehicle.
not bad... not my favorite...
jadie andrus✓ Verified Purchase•August 25, 2023
original key cylinder broke, and I was looking for a lower-cost replacement. thought this would be kind of fun... NO instructions for installation (that sucked). mounted fine/easy. the cover for the "on" switch is spring loaded, and seems like one good bump will close it shutting off power... not sure on that yet, but it's a little sketchy. I may just remove the spring for safety. Otherwise, finish is good, labeling and assembly seem good...
it a good deal for money
rob✓ Verified Purchase•August 1, 2023
i baught this to put in my race car about 4 trips to the track it started to malfunction i could figure out what wasgoing on so i studdied it after problem come to find out id only good for about 8 amps then over loads and burns up the board and the push button start works ausome its still in my car but i went to napa and purchaced 2 count 50 amp switches installed in the same board works great so im not knocking the company that makes these but they need to install stronger tolgle swithes and it would be a perfect set ty robert
It’s actually pretty cool
Darryl✓ Verified Purchase•July 19, 2023
There aren't anything instructions. It's mostly straight forward. My Jeep has a relay for its starter, so I didn't need it. I put the a/c and radio on acc1, and the everything else on the main toggle. Works well
It works great
thomas✓ Verified Purchase•July 17, 2023
My bobcat fires up on the first try now
Page 1 of 2
