elechawk 2 Sets Pan Tilt Servo Mount Bracket for MG996R S3003 Steering Gear Robot Car Boat
Key features
- •Include 2 sets servo mount
- •Compatible with Tower Pro MG996, MG996R, MG995, SG5010, MG995R or HS322, HS422, Hitec, Parallax, Futaba S3003, etc 40×20×36mm servo.
- •This set bracket can be assembled to a 2 Degree of Freedom gimbal. Pan and Tilt for a horizontal surface
- •Aluminium Matte Coat, light and strong. high quality ball bearing, rotating smoothly
- •A camera or sensor can be mount on the bracket for a robot or a rover. The servo bracket can also be used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
elechawk 2 Sets Pan Tilt Servo Mount Bracket for MG996R S3003 Steering Gear Robot Car Boat
List Price: $27.14$24.43DEALYou Save: $2.71 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (30)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.6
out of 5
Based on 10 reviews
5★
70%
4★
30%
3★
0%
2★
0%
1★
0%
ðŸ‘ðŸ‘
crissy hillman✓ Verified Purchase•September 29, 2023
Good, solid construction. BIG. HDNV can size. LegitðŸ‘ðŸ‘
Laser turret
Trake✓ Verified Purchase•September 18, 2023
Worked perfect for my laser turret. Fit standard servos perfectly.
Excellent Project Parts
ScubaMD✓ Verified Purchase•September 15, 2023
I'm building an 'educational' robotic arm for grandkids, run by Arduino. Worked beautifully.
Customer Service by Seller is Great
Marie✓ Verified Purchase•September 10, 2023
UPDATE: 1/19/2021
I have to give the seller 5 stars for their outstanding customer service. Once I started putting the brackets together, I discovered I was missing one of the bearing rings so I contacted the seller requesting a replacement for the single bearing ring I was missing. The seller was more than gracious in that I was sent a complete replacement kit - more than what I had requested.
I am only giving the product 4 stars since the servo horns included will not work with a 24T spline. Although they work well with motors supporting a 25T spline such as the Futaba S3003. (I purchased the Futaba's after the Hitec's I already owned wouldn't work with the provided servo horns. Unfortunately, the HiTec servo horns don't align very well with the bracket's hole patterns. This is not an issue with the brackets, its just a compatibility issue that's not uncommon for parts and motors such as these.)
Original Review:
The Amazon product description states that these brackets are compatible with HiTEC 322 & 422 servos which can be a bit misleading. The servo horns included with this set are 25T, which unfortunately is not noted in the description (I don't know if this is an oversight or what the seller's rationale is for not including). Both the HiTEC 322 & 422 come with a C24T spline output shaft and therefore are NOT compatible with the servo horns included in this Pan and Tilt mount set.
Unfortunately the hole pattern on these brackets are not compatible with HiTEC hole patterns used on standard HiTEC horns so you can't get a clean build using HiTEC horns with this mount set.
I suspect that it will work fine if you're using servos with a C25T shaft - I did check the fit with an older Parallax Continuous Rotation (which has a C25T output shaft) and it fit okay.
It would help if the product description was updated with clarification that the included horns fit a 25T spline output shaft, but are not compatible with a 24T spline output shaft. I can't speak to the compatibility with other servos noted in the description, but I suggest anyone considering this Pan & Tilt mount verify the servos they plan to use have a 25T spline output shaft before ordering.
I have to give the seller 5 stars for their outstanding customer service. Once I started putting the brackets together, I discovered I was missing one of the bearing rings so I contacted the seller requesting a replacement for the single bearing ring I was missing. The seller was more than gracious in that I was sent a complete replacement kit - more than what I had requested.
I am only giving the product 4 stars since the servo horns included will not work with a 24T spline. Although they work well with motors supporting a 25T spline such as the Futaba S3003. (I purchased the Futaba's after the Hitec's I already owned wouldn't work with the provided servo horns. Unfortunately, the HiTec servo horns don't align very well with the bracket's hole patterns. This is not an issue with the brackets, its just a compatibility issue that's not uncommon for parts and motors such as these.)
Original Review:
The Amazon product description states that these brackets are compatible with HiTEC 322 & 422 servos which can be a bit misleading. The servo horns included with this set are 25T, which unfortunately is not noted in the description (I don't know if this is an oversight or what the seller's rationale is for not including). Both the HiTEC 322 & 422 come with a C24T spline output shaft and therefore are NOT compatible with the servo horns included in this Pan and Tilt mount set.
Unfortunately the hole pattern on these brackets are not compatible with HiTEC hole patterns used on standard HiTEC horns so you can't get a clean build using HiTEC horns with this mount set.
I suspect that it will work fine if you're using servos with a C25T shaft - I did check the fit with an older Parallax Continuous Rotation (which has a C25T output shaft) and it fit okay.
It would help if the product description was updated with clarification that the included horns fit a 25T spline output shaft, but are not compatible with a 24T spline output shaft. I can't speak to the compatibility with other servos noted in the description, but I suggest anyone considering this Pan & Tilt mount verify the servos they plan to use have a 25T spline output shaft before ordering.
Works well
Mark Calvert✓ Verified Purchase•August 19, 2023
I have only used 1 set of the brackets so far, but they are well made. It took me a few tries at assembling them correctly. A careful examination of the images is useful.
Page 1 of 2
