PC Products PC-Concrete PRO High Strength Anchoring Epoxy System, 600ml





Key features
- •Two component, professional grade, high-strength anchoring epoxy for cracked and uncracked concrete
- •Use for anchoring threaded rod and reinforcing bar into cracked or uncracked concrete using hammer drill or threaded rod into uncracked concrete using core drill
- •Code compliant for Bulk Applications; Meets building and engineering codes: IAPMO UES ER-632, IBC/IRC 2018, 2015, 2012 & 2009, Florida Building Code 2017 & 2014, AASHTO M235 / ASTM C881-15 Type I, II, IV & V Grade 3 Class A, B & C
- •Apply Concrete PRO with any high thrust standard size caulk gun and 600ml dual cartridge caulk gun
- •Unlike other anchoring epoxies, PC-Concrete PRO can be used in smooth bore holes; no roughing interior walls of holes!
PC Products PC-Concrete PRO High Strength Anchoring Epoxy System, 600ml
List Price: $83.15$74.84DEALYou Save: $8.31 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 22, 2026In Stock (2)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
Good value - Gets the job done
Barbara A✓ Verified Purchase•October 3, 2023
Used in building rails on my front porch. Very satisfied with this product.
Works!
chad✓ Verified Purchase•September 16, 2023
I use this to install some anchors in the concrete for a post and it works great! Way cheaper than the huge tube. Do you have to buy at Home Depot that you enough doing most of it away and you're out 30 bucks
Stopped concrete pool leaks
KD✓ Verified Purchase•August 19, 2023
My concrete pool had developed some thin settling cracks and as a result,..was leaking an estimated 50 gallons per day. This last winter, I drained the pool, used an angle grinder to widen the cracks, then applied this stuff. A few days later, I sanded it,...then prepped and painted it with a 2 part epoxy pool paint. Has worked beautifully. Pool has been full all summer and NO MORE LEAKS. Great stuff. Highly recommend for similar type of project. It does set up quickly though (15 min) so make sure you use small batches.
I used a wide blade putty knife to install in garage crevices
John A✓ Verified Purchase•August 12, 2023
This product was easy for me to mix the epoxy by putty taking a blade of part A and a blade of part B then stirring. I only mixed a small amount at a time because the working time is relatively limited. I was able to press into crevices easily using the blade. It dried quickly and by the next day I was able to press on it as I was curious about how well it might hold up. I ordered this brand because I also ordered the PC Products 2-part cartridge to be able to get deep into cracks and fill any under slab voids. I had to order a 2-part applicator, but I think it was well worth it.
Good Epoxy to repair foundation spalling and cracking
Saturn✓ Verified Purchase•August 1, 2023
This 2 part epoxy is ideal for fixing small cracks and foundation spalling on your concrete foundation.
Precisely mixing the 2 parts together is challenging since it is a 1 to 1 mix it must be fairly precise when mixing it. I used a couple plastic spoons to keep them separate. One spoon is used for the epoxy base and the other was used the epoxy hardener. You must do this mixing process with extremely good air circulation. The hardener fumes are toxic so you will need to open the epoxy hardener container and stir it due to settling then put equal amounts of base and hardener in a small clean container and then quickly close and seal the lid on the hardener container. You can buy this same PC Concrete product in a caulking tube size that pre-mixes it and then dispenses it, but it would cost considerably more compared to these bulk containers. Once it is mixed you have about 15 minutes to apply it to your foundation. repair.
Precisely mixing the 2 parts together is challenging since it is a 1 to 1 mix it must be fairly precise when mixing it. I used a couple plastic spoons to keep them separate. One spoon is used for the epoxy base and the other was used the epoxy hardener. You must do this mixing process with extremely good air circulation. The hardener fumes are toxic so you will need to open the epoxy hardener container and stir it due to settling then put equal amounts of base and hardener in a small clean container and then quickly close and seal the lid on the hardener container. You can buy this same PC Concrete product in a caulking tube size that pre-mixes it and then dispenses it, but it would cost considerably more compared to these bulk containers. Once it is mixed you have about 15 minutes to apply it to your foundation. repair.
Page 1 of 2







