Evemodel PCB012 Power Distribution Board Self-Adapt Distributor HO N O LED Street Light Hub DC AC Voltage Train Power Control
Key features
- •You can select any type for power input,4V to 24V,AC or DC. There is no limit on the input current because there is a output current controller can adapt the output current.
- •Be with dimmer control for LED lights and can adjust light brightness.(Clockwise=brighter)
- •Output Voltage Controller: Controller at 3V,output is stable 3V;Controller at DIR,output is near to the input;Controller at 12V,output is stable 12V.
- •One distributor can support up to 28 lights.It is easy to expand to several boards if you need to use more light.And please support the lights that need the same current and voltage in one distributor.Do not mix the lights with different operating current and voltage on the same distributor.You can prepare another Power Distribution Board to use as the expanding one.
- •The total output current must be less than the input current.For example,normally one led light need 20mA,one 1000mA transformer can support 50 such led light totally,but it will only support 10 pieces 100mA bulb lights.
Evemodel PCB012 Power Distribution Board Self-Adapt Distributor HO N O LED Street Light Hub DC AC Voltage Train Power Control
List Price: $29.08$26.17DEALYou Save: $2.91 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 23, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.5
out of 5
Based on 10 reviews
5★
90%
4★
10%
3★
0%
2★
0%
1★
0%
VERY low power
Matthew Bilbrey✓ Verified Purchase•October 20, 2023
Bought this to drive several 12v LEDs and LED strips for a model I'm building (not a train) but it just cannot push enough watts or amps to be useful. It cannot power a 5 inch strip of 12v COB LEDs only producing a very dim light that gets dimmer with the addition of only another single LED. Even adjusting the dial all the way up - just not enough juice. Ill use it for something else.
I really like it
Christina De Leon✓ Verified Purchase•September 29, 2023
Setting up was easy, even for a beginner like me. I checked it with my husband's voltmeter, and everything is perfect. Connecting two together was simple. I bought an AC DC adapter, and it fit fine. There is a light on the circuit board to let you know if it has current; make sure that light is bright, if it's dim, you need to increase the input voltage. I set my AC DC at 6V input, set the tab on the circuitboard to 3V, and all the led lights lit up perfectly. This is a nice little kit. Recommend.
Good control for safe LED current protection
R. D. Hoag✓ Verified Purchase•September 21, 2023
Lots of lights can be attached and are protected from over current danger. The LEDs need to all be the same, all white or all red. Almost any wall wort will work, 5v will barely work but 6v on up work fine, same with batteries if used. This saves having to solder resistors to each LED. There is a dimmer pot but it causes the lights to flicker.
Nice
ronny hilton✓ Verified Purchase•September 5, 2023
The media could not be loaded. Great little board. Using it to light 29" falcon model. Have two one for blinking light one for constant on.
Great quality Power Distibution Board that power adapts to run LED street lights.
Tom✓ Verified Purchase•August 28, 2023
This is a great Power Distribution Board that takes various input voltages and reduces the output to power LED street lights on my HO scale layout. Easy to read and understand instruction sheet is included. The board was received in excellent condition, and shipping was quick. This seller was very easy to work with. I am a happy customer.
Page 1 of 2
