Huthbrother Camshaft 585" Lift 286° Duration Compatible with LS sloppy stage 2 camshaft LS LS1, Replace1997-2007 Chevy GM LS V8 Engines, Replace Part Number E-1840-P camshaft
Key features
- •👍★🚗【Valve Lift】--ls camshaft Intake Valve Lift: .585" Exhaust Valve Lift: .585"
- •👍★🚗【Compatible with LS Most Engines】--3 1/2 inch opening,Fastens with 5/8" x 6-1/4" Hitch pin,5/8" hole in Vertical stop Compatible with LS Sloppy Stage 2 4.8 5.3 6.0 6.2,585" Lift 286°Duration Fits1997-2007 GM LS V8 Engines
- •👍★🚗【Intake and Exhaust Parameters】--sloppy stage 2 camshaft 👍Intake Duration @ .050": 228° 👍Exhaust Duration @ .050": 230°👍 Lobe Separation: Intake: 108° Exhaust: 116°
- •👍★🚗【After-Sales Service 】--- If you have any problems, we are happy to respond,We will reply to you within 24 hours,Please match the part number with part number on the old part to ensure fitment before purchasing.
BrandHuthbrother
CategoryCamshafts
Huthbrother Camshaft 585" Lift 286° Duration Compatible with LS sloppy stage 2 camshaft LS LS1, Replace1997-2007 Chevy GM LS V8 Engines, Replace Part Number E-1840-P camshaft
List Price: $177.50$159.75DEALYou Save: $17.75 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.1
out of 5
Based on 10 reviews
5★
60%
4★
40%
3★
0%
2★
0%
1★
0%
Great cam awesome power increase
David o Farley✓ Verified Purchase•August 2, 2023
The media could not be loaded. Shipping package absolutely sucked ballz , box was broken on both sides and dirt was crammed inside the center of the cam , BUT I cleaned id thoroughly and installed it with new set of lifters and a HV oil pump , took that stock 4.8 160hp engine to 310hp , has strong pull through all gears , and yea id highly suggest a small stall converter, it definitely needs it.
Great cam shaft!
Larry Edmisson✓ Verified Purchase•July 12, 2023
Made of quality materials. Looks good and smooth installation. Good seller.
Good cam bad shipping package.
Christy Wickboldt✓ Verified Purchase•July 10, 2023
The cam looks good, the sensor area is a little rough, but it works fine. Now the packaging was terrible. The factory packaging was good, oiled, plastic wrap, paper wrapped, plastic shrink wrap, cardboard box. The shipping package was a little brown craft paper in a large box. Both boxes were destroyed in shipping.
Nice machine work.
tom viau✓ Verified Purchase•July 1, 2023
The camshaft looks good and should perform well. No cam card so that is why i gave it 4 stars
A really decent camshaft for an LS build.
Glenn Cattani✓ Verified Purchase•June 28, 2023
Please note that I haven't had a chance to run the cam; it's only installed. (03Nov2021). However:
- measured all of the lobes and they were all within tolerance, and with a 1.71 stock rocker you get the advertised lift 0.585/0.585.
- cam was degreed and met advertised numbers
- physically, the cam looked good. No damage, no imperfections, etc.
- when installed, it fit in the block with a set of standard sized bearings (new)
I'll report back once I've run it.
- measured all of the lobes and they were all within tolerance, and with a 1.71 stock rocker you get the advertised lift 0.585/0.585.
- cam was degreed and met advertised numbers
- physically, the cam looked good. No damage, no imperfections, etc.
- when installed, it fit in the block with a set of standard sized bearings (new)
I'll report back once I've run it.
Page 1 of 2
