Looking for vanity lighting is daunting. Finding a simple, affordable, modern design for a LARGE bathroom took me a day of internet searching. Then I saw this one. I bought both the 40" and the 48" to replace my original builder grade "dressing room" style light bars with the round globe bulbs. I just installed the 48" in my master bath and it is absolutely perfect. As a word of caution, it emits a VERY BRIGHT WHITE light, which is exactly what I wanted as the bathroom is large and can handle it. If you want more control over the lumens, it is dimmable. The fixture definitely meets my expectations, and was on super sale, costing less than the smaller 40".

My only criticism is that the screws are visible on the undersides of each bar and in full view, not horrible, but there nonetheless. I bought chrome, but they would probably be invisible in a bronze or black finish. Be aware that it is a very slim fixture, so might not work in a massively large room with 12' ceilings, but I don't think you can get a more perfect light for 8' ceilings.

I will definitely purchase this again for another home!

Lots of clear reviews on here. The fixture is super nice looking. The finish is super clean and crisp. The light is spread nice and even in the diffuser. Very nice. The only crapper is the color temperature selection. It's done by toggling the power on/off but it's not like "do it quick to change temperature" it's more like toggle within 10 seconds and it changes. That's a long time actually, very easy to change the temperature on accident. Hasn't been too much of an issue for us so far but fair warning. Installed this in our bathroom with another LED overhead and I have to say the natural white color is much nicer and the light is "cleaner" coming out of this fixture in comparison to the other.

I bought one similar to this one from another vendor and it blew. I liked the style and so I searched for the same model. I found this one and this time I purchased a warranty. Hopefully, I won't have to use it. So far it's working fine, and it was easy to install.

The product arrived on time and as described. I bought the 48 in. offset version. USPS delivered with damages to the carton box (hole size of a fist) but the product is well packaged therefore I didn't see any damage to the product itself. It is easy to install. Since it is long, I did need a helping hand from my wife while I made the electrical connections.
I took off one star for the following reasons:
- Minimal instructions, printed in very small fonts. Small instructional picture, very hard to read. Installation is straight forward for anyone who has installed light fixtures before.
- The mounting plate can be mounted to the drywall with 4 holes at the corner. Since this light is long, I decided to use these holes as well to attach to the wall. Even with 4 holes, only 3 drywall plastic anchors and 3 screws were provided. I used extra anchors I have at home
- I feel that the provided screws for the drywall anchors are too small for the size of the anchors. I had to use a slightly bigger screws to feel a tighter bind to the plastic anchors

We like the light. It looks modern. It provides plenty of brightness and the white color that we want.

We just purchased and installed the black, 3 color 48 inch light fixture. The fixture wasn't too hard to install, but you either need a second person to hold the light while you wire it, or, what I did was to use a zip tie as an anchor as my holder. I mounted the back bracket to the wall, then fished a zip tie thru one of the bracket holes and around the wire harness. That made it a lot easier for one person.

We are still trying to figure out how the color changing functionality works though. There is no switch inside that let's you change the color temperature like most LED lighting fixtures have nowadays. In order to change the color temperature, you have to toggle the light switch on/off until you get the setting you want. This is a real bummer. I don't know why they don't just give you a permanent setting. We did notice, however, that if you leave the light on for an extended period of time on a color temperature of your liking (warm, for example), then turn it off. The next time you turn it back on, it "remembers" your setting. BUT, if you toggle the switch on/off again, it begins cycling thru the temps again! There are no instructions on how this works (the one-page installation simply mentions to use the light switch to toggle between color temps). We looked online as well via the manufacturer and other sites and could not find any information on how this works.

Overall it looks very nice and we decided to keep it and live with the weird toggle function. Hopefully we can find some more information on the specific operations or how to force it to stay in the setting we want.