TAISHER Foot Valve Aluminum Can Crusher，Eco-Friendly Recycling Tool，Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher
Key features
- •Size: Bore: 2.48 inch, Stroke:7.9inch
- •Maximum Can to be crushed: OD 2.8 inch, Height 7 inch
- •Maximum Working Pressure: 90 to 120 PSI working pressure.
- •Safety: The flush press valve is used to activate the cylinder
- •Sturdy & Durable: Metal material for the Frame and Piston, Coating and Oxidizing surface treatment for corrosion resistance
TAISHER Foot Valve Aluminum Can Crusher，Eco-Friendly Recycling Tool，Heavy Duty Pneumatic Cylinder Soda Beer Can Crusher
List Price: $90.16$81.14DEALYou Save: $9.02 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 24, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.4
out of 5
Based on 10 reviews
5★
60%
4★
40%
3★
0%
2★
0%
1★
0%
Works great.
David John ✓ Verified Purchase•October 13, 2023
The media could not be loaded. Built well, crushed 1000 plus cans so far and no signs of wear or damage. You could probably set it up differently than what I did to make it work better but still got the job done.
CRUSHING CANS IS SUPER COOL NOW! NEED MORE MOUNTING TABS.
Jason A Colvin✓ Verified Purchase•October 12, 2023
I enjoy using this can crusher! Quick and fun to use on standard 12oz and 16oz cans. I utilized the only 2 mounting holes at the base where the plunger rests to mount to a drum lid. I also use my big 220vac 80 gallon air compressor which is plenty to run this device, can't speak for smaller air compressors? Cans will sometime stick but I spray a general soapy type cleaner on the plunger and on the end where the can drops into the bucket without whipping the cleaner off. This helps get rid of possible sticky soda on those surfaces. Occasionally, cans will wrap around the top of the crush point but rarely maybe 1 can out of every 30? . I just push the can off and down with another can I about to place in the crusher.DOES NEEDS ADDITIONAL MOUNTING TABS or holes, as several buyers have mentioned in previous reviews. FUN, FUN, FUN WAY TO CRUSH CANS!
Works great at 70 PSI
Joe Blow✓ Verified Purchase•September 13, 2023
Even though I'm using an air compressor with a built-in regulator, I added a second regulator set to 70 PSI to make sure I will never over pressurize the crusher. Also added a shutoff valve on the output of the regulator in case I have to stick my hand in the unit without having to remove the airline. The only downside of the unit was that the plexiglass arrived partially detached from the unit. Fixed that with some epoxy on a few of the corners. Other than that, all good ðŸ‘ðŸ¼
I wish it operated faster but I love it still
Y Johnson✓ Verified Purchase•September 11, 2023
This is helpful for crushing cans in our recycle container. Is not a pneumatic system so it operates slowly. One you press down, it stops when it can't crush any further. Then, you have to hold the button down for the lever to return into position. This action is a little cumbersome and keeps you standing there while it all takes place. I still like it better than a regulate can crusher, but wouldn't if I had tons of cans. See photos.
Easiest way to crush cans. Seems to work with CO2 Tanks.
Paul M. Bruner✓ Verified Purchase•August 27, 2023
The full cover version is very well built. Instructions really need to be a bit more clear for people not used to hooking up air hoses but the box contains everything. Even a full screwdriver of all things. Be sure to use the Teflon tape on all the connectors. You need atleast 95psi or more to get the excess gas to push out the crushed can even if it will crush with less.
I was a bit worried because I wanted it by my soda fridge but having a noisy air compressor just for it seemed excessive but I hooked up a old 5lb co2 tank and set the regulator to 100 psi and seems to work just as well. I just used the tank as an air blower for dust anyway and it should last quite a while. I haven't tested how well this setup works as I just set it up but so far I am loving it. Remember to GET A REGULATOR if you use a tank.
I was a bit worried because I wanted it by my soda fridge but having a noisy air compressor just for it seemed excessive but I hooked up a old 5lb co2 tank and set the regulator to 100 psi and seems to work just as well. I just used the tank as an air blower for dust anyway and it should last quite a while. I haven't tested how well this setup works as I just set it up but so far I am loving it. Remember to GET A REGULATOR if you use a tank.
Page 1 of 2
