Key features

• •【Why Need It】For example, when the intake pipe of a car leaks, the symptoms that will appear are engine weakness, increased exhaust nitrogen oxide emissions, and difficulty in starting. Since the engine needs a higher concentration of combustible mixture during the starting process, and the leakage of the intake pipe causes the lean combustible mixture, it will cause difficulty in starting the engine. Therefore, the car range hood is an essential tool for every car owner.
• •【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system
• •【Widely Applicable】Smoke Leak Detector is designed for leak detection of automobile air intake system, fuel system, exhaust system, cooling system ect,Suitable for all family cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, speed boats, etc.
• •【Air Mode & Smoke Mode】Built-in air pump, smoke generator and pressure gauge. As the air pressure increases, if the pointer value of the pressure gauge continues to increase, it means that the pipeline is not leaking. When the pointer value of the pressure gauge continues to decrease, it indicates that the pipeline is leaking. Fill the pipe with smoke and check the pipe with a flashlight after 2 minutes. Leaks can be found quickly under the light
• •【Oil level gauge and switch】If you can fill the main engine through the oil level gauge, generally add 20-30ml. If you add too much oil to the main engine, it will not burn up and smoke. The oil level switch can effectively recover the unused oil, and then it can be used again.