Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8
Key features
- •Direct replacement of stock manifolds and bolt-on fit for stock exhaust pipes
- •Most efficient at providing horsepower gain from idle to mid-range RPM
- •Fully mandrel bent tubes made of 16-gauge (1.5mm thickness) cold roll flash mild steel
- •Head flange laser-cut from 3/8-inch (9.5mm) thick steel plates and flattened by hydraulic press
- •All joints TIG welded for great resistance against cracking and wearing; Hi-temp paint that holds up to 500C or 932F
CategoryHeaders
Exhaust Headers Manifold 1-5/8 in. Mild Steel for 2002-2013 Silverado Sierra Suburban Tahoe Yukon Escalade 4.8L 5.3L 6.0L 6.2L V8
List Price: $314.27$282.84DEALYou Save: $31.43 (10%)
Free shippingFree Returns – 30 daysFree Order CancellationSecure Payment2–3 Days DeliveryGet It June 25, 2026In Stock (1)No marketing spamNo account requiredFulfilment by FedEx / Amazon / UPS / ShipwirePayPal / Card Buyer Protection
Customer Reviews
Reviews sourced from verified Amazon purchasers4.2
out of 5
Based on 7 reviews
5★
71%
4★
29%
3★
0%
2★
0%
1★
0%
They work with some slight modification
Amazon Customer✓ Verified Purchase•September 28, 2023
Installed on a 2002 Silverado with the 4.8
Everything bolted up just fine and fit well. Only issues I had is that I had to dent the primary on #3 as it was making contact with my steering shaft. And the stock style spark plug boot wouldn't fit between #6 & #8 the boot was on the header. You have to use a angled boot like pictured. Looks like it's going to be a real pain to change that spark plug as well. I'm skeptical about the paint holding up but time will see. All bolts and gaskets fit great. Just those two issues.
Everything bolted up just fine and fit well. Only issues I had is that I had to dent the primary on #3 as it was making contact with my steering shaft. And the stock style spark plug boot wouldn't fit between #6 & #8 the boot was on the header. You have to use a angled boot like pictured. Looks like it's going to be a real pain to change that spark plug as well. I'm skeptical about the paint holding up but time will see. All bolts and gaskets fit great. Just those two issues.
Great product. Perfect fit on my 08 Chevy Silverado 5.3
Brad High✓ Verified Purchase•September 7, 2023
Only one of the factory spark plug wires touched on the number 7 cylinder. I would recommend retightening the header bolts after a couple heat cycles.
Great customer service
Sophia Emery✓ Verified Purchase•August 18, 2023
Great customer service for fitment.. gaskets and hardware are great
You may need to order 90° angle performance plug wires they are 50$
Good experience
You may need to order 90° angle performance plug wires they are 50$
Good experience
Real bolt on
Mr. 45✓ Verified Purchase•July 28, 2023
Wanted to get a little more power in my 2012 truck got this kit and was surprised at how well it fit and with the fit and finish of the product the only down side is that a a set of spark plug heat sleeves are needed because the stock metal heat Shields won't fit but that seems to be the norm other then that they sound good and the truck runs better and is more powerful
Direct fit
James✓ Verified Purchase•July 20, 2023
Bolted right up in place on my 08 Silverado 5.3l no problem with alignment factory cats bolted on perfectly. They look great! Makes the truck a little louder.
Page 1 of 2
