The metal structure is great. The bag material is fine so far but I can tell that the handles will eventually separate from the bag, but I'll sew them back in when that happens. Overall good value.

It holds about 60 pounds of wood not too big doesn't stick out in the room at all. Works great.

This little log holder isn't huge; keep that in mind. However, when I ordered it, I didn't look at the size, and when the deceptive small box came, I was a bit worried. That said, it's a fine piece that works great for an indoor log holder.

The build quality is better than I thought it would be, considering how thin the bars are when screwing it together. I tried to jokingly bend the bars and realized they weren't giving in the slightest. This rebuilt my confidence in the piece as I got to work putting it together.

It took maybe ten minutes to screw together using the picture instructions. It only has two types of screws, so there's nothing really complicated about it. I did mess up, though, and tried to screw all the 'center bar pieces' (F) in right away when the top (B) shared the same screw. So I had to undo that bar and use my mallet to hammer the B top bar in.

I'm assuming the fabric that came with it is for carrying logs to the holder from the chopping block. I honestly don't know how well this would work because the stitching isn't reinforced, and, as another reviewer had already stated, it would probably rip pretty easily. As for me, I use it to keep wood flakes off the floor. It does not sit flush on the rack either, but that's okay.

In the log-loaded picture, I believe that's four store-bought bundles of wood sitting comfortably on the rack. But, unfortunately, it cannot hold anymore, as you can see.

On a side note, you do not need to tighten the screws like crazy when assembling the piece. You will cause the rods to cave and make them lose some integrity. Make them tight, but not by force.

Overall, I'm pleased with this little log holder. While it's certainly not going to keep large outdoor fires fueled, it will keep my pleasant indoor fireplace going through the night. If that's what you're looking for, I don't think you can do wrong here. The biggest con would be that the price is a little steep if it weren't on sale.

I specifically ordered this as the advertised dimensions were perfect for where I wanted to put this firewood rack next to my fireplace. It does fit exactly how I was hoping it holds enough wood for a days worth of fire.
The description says 'heavy duty iron'. I took a star off because this is absolutely not heavy duty iron. It's very light gauge 1/2" diameter square steel tubing. That said, once you assemble it (which is very easy and quick and only requires a Phillips screwdriver) it is adequately sturdy and has no trouble holding all the wood you can fit in it (a couple large arm loads).
Speaking of assembly, the assembly sheet is ok but does have a mistake. I took a picture of the section of the guide that shows you are to use screw "G" but you actually have to use screw "H". I corrected it and the photo shows my correction. Other than that it's pretty clear how this goes together. Also, don't go all He-Man when tightening the screws. If you go too tightly you'll collapse the thin tube steel.
Also, it's a bit high priced for what you are getting. But, if you can get it on sale with the coupon offer, it's an ok value.
I hesitated trying to decide if I should give 3 or 4 stars. I decided on 4 purely because it does exactly what I was wanting it to do and is the perfect size.

Love this fire wood rack! This rack only took me about fifteen minutes to put together. I love the quality of this rack. This rack fit all of my indoor wood. This would make a great gift. Highly recommend!