I would say this kit is just ok. You definitely get a lot of options and there have been several times were I was working in tight spaces I wish I had something like this kit. But, it didn't appreciate when I used the impact driver on them. The Philips bit looks chewed up after just a couple of screws. This is probably more than adequate if you are DIYer, but if you are making money with your tools, it might get you out of a pinch, but I wouldn't try to use it everyday. Also, all these parts and pieces, but no case or bag or anything to contain them so... guess they are just going to roll around in my tool box.

This is a very nice addition to my toolbox. For the price, the quality is quite reasonable.

First, the Bendable Flexible Drill Extension bits work well. I did double them up and attempt to screw a screw into some wood, and it worked perfectly. In reverse, it was a little harder, but I did get it to work. There is a magnetic bit in each piece which keeps the drill bit in place.

I'm not sure why there are both Colourful Multifunction Socket Adapters, and regular (non-coloured) adapters - of exactly the same size ... for the same price, additional pieces could have been included. Either way, on all all of these pieces, there's a nice ball spring included on the square block head that holds the piece in place. They work well, and there are three pieces for each of ¼", ⅜", and ½". The coloured labelling is nice to help easily identify the piece.

The Hex Shank Magnetic Bit Holders work well. There is a magnet to hold in the drill bit, and a retractable sheath that locks the piece in place. The two downsides are that the black paint goes all over one's fingers, and there is no sheath to go over the screw to keep it in place. The sheath does rotate, so it can be held in place during drilling, however pressure can't be applied, as it will have the effect of releasing the physical (as opposed to magnetic) lock keeping the drill bit in place.

My favourite part is the spring coil CR-V Wrench Power Drill Adapter Tool. This piece allows any (fitting) nut head or screw (think hooks) to easily be screwed with a power drill. It also comes with (yet another) hex shank adapter to use in a regular power drill.

The 360° Rotatable Socket Adapters only rotate about 15°, so I don't see them as being particularly useful.

I see the 105° (just slightly less than right-angle) Drill Attachment as being very helpful to get to hard-to-reach places with limited access, e.g. screws under a desk with draws. This, coupled with the Hex Shank Magnetic Bit Holders will allow deep access.

Finally, the included screw bit heads include the most commonly used pieces - several small and large flat, Philips, and star-head pieces. Very useful, as I often lose some of these pieces (or my son fails to return them after he uses them!).

Again, for the price, this is a reasonably good quality set, particularly with the magnets and ball springs being in place.

I had a Ryobi brand flexible extension and broke that using an impact driver drilling a spade bit through a 2x6 in a tight space. I thought I would give this set a try since I needed a new flexible extension. They are very handy for tight spaces.

I found that these flexible extensions are much lighter and thinner than the Ryobi one I had which means that they will be ok for just doing some screw turning. These don't look like a heavy duty set and will most likely be used for the occasional need around the jobsite. All the extras in the box were just additional goodies for me. I can always use more extensions!

Good value

This is a nice assortment of flexible shafts and attachments for our drills. Like so many other people who can't afford to hire someone else to do our repair work, we do a lot of DIY stuff (my husband is always working on something or other on our vehicles too), so I expect it will get a lot of use. I can't tell you how many times we have each been in a situation where fingers can't quite reach or the screwdriver is a little bit too long or at the wrong angle. This will make those situations a lot easier to deal with. The price isn't bad either for the number of different attachments you get--especially since the quality appears good as well. Of course, part of this 32 piece kit is the obligatory set of screwdriver bits (I think we probably have a few dozen of those at this point since everyone who makes tools--from socket sets to tool belts feels the need to include one of those!)

At any rate, it is a decent set and my only gripe is a lack of some sort of case to carry it all in. The listing specifically says "with a box" but the only box is the shipping box made of cardboard that doesn't even resemble the one shown in the listing photo. I took off one star for this bit of false advertising. You will definitely need to get a small plastic or metal box if you want to keep all these things together.